Pre construction planning checklist

The term pre-construction describes activities undertaken in preparation for a construction projects full launch. Keep reading as we discuss what pre-construction is, the various activities it entails, and why its such an important investment for construction companies.

What is pre-construction?

Pre-construction encompasses all activities that take place prior to the formal start of a construction project. The pre-construction activities list includes:

• understanding what the client needs
• defining the projects scope
• estimating the projects cost
• assessing the projects feasibility
• flagging potential issues with the project
• identifying and acquiring the necessary permits

These activities arent necessarily undertaken by the general contractor. Rather, as with many other parts of a construction project, pre-construction is often subcontracted out.

Following the pre-construction process, all stakeholders [including the owner and general contractor] should understand whether the project is worth proceeding with.

Exploring the pre-construction process in greater detail

Next, lets take a closer look at each item on the aforementioned pre-construction activities list.

Understanding what the client needs

At the very start of every pre-construction process, it helps to have an understanding of what the projects owner is requesting. Thats the focus of this stage, during which the involved parties review documentation from the client and make any requests for information [RFIs] as required.

If allowed and applicable, the involved parties may also inspect the job site or existing structure to better understand the clients requirements.

Defining the projects scope

The clients needs may not always align with a sensible project scope. Thats where this stage comes into play. In it, the contractor conducting pre-construction activities will determine a reasonable project scope that gets the client as close as possible to their ideal state in an efficient manner.

Estimating the projects cost

The next stage in the pre-construction process entails estimating the projects cost. The outcome of this exploration is essential for understanding whether the project is feasible and worth proceeding with.

Contractors use a variety of strategies during the estimating process, including:

• referencing past projects with comparable requirements
• receiving quotes from subcontractors and material suppliers
• determining the profit they would likely earn during the project

Assessing the projects feasibility

After analyzing the projects scope and estimating its cost, the next step for a pre-construction contractor is to determine whether the project is feasible. If its not, the contractor may propose adjustments to the projects requirements and scope that should bring it within the realm of feasibility.

Flagging potential issues with the project

This next stage in the pre-construction process is closely related to the previous one. During it, the contractor conducting pre-construction activities will highlight potential challenges. The issues underlying these challenges might range in type from environmental to regulatory or anything in between.

While highlighting these challenges to other stakeholders, the pre-construction contractor will likely propose solutions or attempt to reach some other agreement that will allow the project to proceed.

Acquiring the necessary permits

This is among the final stages in the pre-construction process. In it, the contractor overseeing these activities may acquire the necessary permits in order for the project to commence. This often takes place during the pre-construction process since delays in acquiring permits would otherwise bring the entire project to a halt.

Benefits of a well-planned pre-construction process

Pre-construction can take lots of time. Heres why savvy construction professionals and project owners see it as a worthwhile investment.

Improved foresight into potential project issues

Pre-construction planning provides advance warning about issues that may arise once the project begins. This gives professionals time to identify and implement solutions [or pull out of the project altogether if those issues are insurmountable and speak to feasibility challenges].

Without a comprehensive pre-construction process, stakeholders might only become aware of substantial issues once the project is already well underway. At that point, it may be incredibly difficult [and expensive] to change course, whereas making adjustments during the pre-construction phase mightve been easier.

Better estimating and management of project financials

As mentioned earlier, estimating is a key part of the pre-construction process. And, as many construction managers know, good estimating is essential not only for the projects success but also that of the entire company. Indeed, according to an Intuit study, 25% of construction firms describe themselves as being just two to three inaccurate estimates away from going under.

Improved stakeholder engagement

The pre-construction process is a time for various stakeholders [from the owner to general contractor and subcontractors] to be involved in determining how the project proceeds. This should result in improved stakeholder engagement over the course of the entire project.

Increased likelihood of project success

The aforementioned benefits of a comprehensive pre-construction process contribute to arguably the biggest goal for any construction company: ensuring project success.

The pre-construction process gives professionals many opportunities to be proactive and address potential project issues before they arise.

Elevate your pre-construction process with Bridgit Bench

Bridgit Bench is the leading construction resource management software in North America. It includes many features that assist in the pre-construction process, including:

• Resource management forecasting: predict your companys resource requirements and capabilities throughout the project lifecycle
• Project database management: track important information about your project and quickly see all of your companys upcoming and ongoing projects at a glance. Streamline work assignment efficiency with insights into allocations and historical data.
• Reporting: pull and easily compare reports from prior projects to your current undertaking to create more accurate estimates
• Remote planning: take your pre-construction activities into the cloud with our fully remote solution; enter data from the field with just a few taps

To learn more about Bridgit Bench and its capabilities, visit this page. You can also sign up for a demo of our platform here.

What is pre-construction? Conclusion

Pre-construction is a process that consists of all activities undertaken prior to a construction projects formal start. During the pre-construction process, contractors conduct their due diligence and ensure they have the information and awareness required to proceed confidently with the project.We hope this article has helped you understand the pre-construction process and what it entails. Click here for more articles about construction project and resource management.