Com.apple.diskmanagement.disenter error 49244 là lỗi gì năm 2024
Disk Utility là một ứng dụng quản lý đĩa cứng đi kèm với hệ điều hành Mac. Phần mềm có thể tìm và sửa các lỗi liên quan đến định dạng và cấu trúc thư mục của đĩa Mac. Những lỗi này nếu không được khắc phục có thể dẫn đến nhiều lỗi trong quá trình sử dụng, trong đó, một số lỗi có thể khiến máy Macbook không khởi động. Bài viết này sẽ hướng dẫn bạn cách khắc phục lỗi ổ cứng bằng Disk Utility. Bạn chỉ có thể mở Disk Utility từ thư mục Utilities của thư mục Applications. Tuy nhiên, nếu máy Mac của bạn không khởi động được hoặc bạn muốn sửa đĩa mà máy Mac của bạn khởi động từ đó, hãy mở Disk Utility từ macOS Recovery. 1. Xác định xem bạn có đang sử dụng máy Mac với Apple silicon hay không, sau đó làm theo các bước thích hợp:
2. Bạn có thể được yêu cầu chọn một người dùng biết mật khẩu. Chọn người dùng, sau đó nhấn vào tiếp theo và nhập mật khẩu quản trị viên của họ. 3.Từ cửa sổ tiện ích trong MacOS Recovery, chọn Disk Utility và nhấn vào tiếp tục. Chọn đĩa của bạn trong Disk UtilityChọn View > Show All Devices (nếu có) từ thanh menu hoặc thanh công cụ trong Disk Utility. Thanh bên trong Disk Utility sẽ hiển thị từng đĩa có sẵn hoặc thiết bị lưu trữ khác, bắt đầu từ đĩa khởi động. Bên dưới mỗi đĩa, bạn sẽ thấy bất kỳ vùng chứa và dung lượng trên đĩa đó. Sửa chữa dung lượng, tiếp đến là vùng chứa, sau đó là đĩaĐối với mỗi đĩa bạn đang sửa chữa, hãy bắt đầu bằng cách chọn ổ đĩa cuối cùng trên đĩa đó, sau đó nhấn vào First Aid (Biểu tượng ống nghe y tế) ở góc trên cùng chính giữa. Nhấn vào Run bắt đầu kiểm tra ổ đĩa đã chọn để tìm lỗi. Sau khi Disk Utility kiểm tra xong, hãy chọn mục tiếp theo phía trên nó trong thanh bên, sau đó chạy lại First Aid. Tiếp tục di chuyển lên danh sách, chạy First Aid kiểm tra cho từng ổ trên đĩa, sau đó đến từng vùng chứa trên đĩa, rồi cuối cùng là đĩa. Lưu ý:
Trên đây là cách khắc phục lỗi ổ cứng trên Macbook bằng Disk Utility, hy vọng bài viết này hữu ích với bạn, giúp bạn có thể thực hiện thành công khi gặp phải trường hợp lỗi ổ cứng. I'm having a little issue with mounting my external hard drive lately. I've tried quite a few methods in hope of getting it to work again, but so far, no luck. I hope someone can help me solve this issue, or those who have the same problem may also share your insights. My external hard drive was working fine about a week ago. But one day, I ejected the hard drive and the icon disappeared, so I thought it was safe to unplug it. When I did, it said the hard drive was not properly removed. It still works fine when I use it the next day, but the same thing happened. It said the drive was not properly removed after I ejected the drive, waited for the icon to disappear, and then unplugged the drive. After that, it never works again, and the attached images are the info I got when I tried to mount or run first aid on this drive. Please help & thank you in advance! Computer: 27" iMac - MacOS Monterey External Hard Drive: WD_Black 4TB. APFS encrypted RepliesSame issue with my drives…. I had an external drive for my pictures and I could not access it. I tried saving it through terminal with all the commands i could think of…. Nothing really helped. In the end i capitulated and bought „Disk Drill“ to access my files. Then i loaded all the pics on a new external drive and about two weeks later the same error happened. I am afraid, Monterey has a weird bug. FIXED - NOW I'M GOING ***** 😁 FIXED ... by doing WHAT? Please post a solution to this problem if you could fix it. I had this happen 4 TB WD My Passport on Big Sur 11.6.2, the 1 TB partition for my Time Machine didn't come up and mounting gave the "disenter error 49218". Here's what worked for me (at least for now): "Try to mount the disk, and switch to Terminal and write Attempted to run First-Aid on that partition. Restarted the computer. Time machine came back after that. No clue which of the steps may have actually fixed it. Will find out the next time that this inevitably occurs. This worked for me too: https://developer.apple.com/forums/thread/680500?answerId=676624022 676624022%C2%A0%22Try to mount the disk, and switch to Terminal and write sudo pkill -f fsck" Attempted to run First-Aid on that partition. Restarted the computer.I agree it's a weird bug with Monterey. I ran into the same issue with my external Samsung 4TB SSD. After I upgra ded to Monterey my drive immediately started acting weird and then I received this message "Could not mount “4TB SSD”. (com.apple.DiskManagement.disenter error 49218.)" I've tried all kinds of software including Terminal to force mount and I'm still unable to mount this external drive. I have over a decades worth of family photos in iPhoto on this drive most likely all lost. Thanks MacOS Monterey! I unplugged a 1TB SSD without ejecting it first, and when I connected it again sometime later, I couldn't even see it in Finder. I opened I'll remember to eject the drive properly next time before unplugging it. I unplugged an external HDD without ejecting it first, then had error 49218 when trying to mount it. Surprisingly First Aid didn't show any errors, but still I couldn't mount it. Restarting the MacBook helped, it just automounted. I'm on Big Sur. Restarting the MacBook worked Ok, I had this same issue and found a fix. However, it's ONLY a fix if you do not care about what is on the external HDD. Open Disk Utility and hit Partition. Change it to APFS (Encrypted). I hit "Apply" and it warned me that all data would be deleted. I said ok. It wiped it and then it automatically mounted and all is well now. Mine was previously on APFS (case sensitive) and I had all of the same issues you all have had and none of the suggested fixes did not work. FIXED! I've had trouble accessing my external LaCie time machine drive for a while now and nothing I had found online has helped. Couldn't mount it, erase it or use first aid on it. Would get failed messages non stop. The only solution that has helped I have, fortunately, found was by this guy on youtube, https://www.youtube.com/watch?v=Z9y1oRYlmh0. Formatting the container within the disk utility to a MAC OS Journaled had worked and I was able to access the partition anew and then restart the time machine. I am no developer, but was reading these forums and thought of posting this in order to, maybe, help some of you. I'm having the same problem with my MacBook Pro M1 max. I have a 2TB external drive I was using with Time machine backups that I can No longer mount. Even disk utility won't allow the disk to be erased and reformatted. I would have thought that apple would have the solution by now seeing how so many have encountered this problem. can someone please help???? I've seen all the post on how to regain access to the disk, but how do I do that without erasing and loosing all my Time machine backups? Same Problem here, it happened after the MacOS firmware update to 12.4... I use an external WD hard drive, APFS (encrypted). Already conacted the Apple and WD support, they couldn't help me |