You will have to validate the patch recommendations and determine if they are truly required or already superceded by newer patches.

Also, I have seen cases where Oracle 10g asks for patches of products which aren't isntalled. My experience in those cases is the patch isnt needed if the product isnt installed.

Either provide us a list or you will need to validate each requirement.

Unix, the other white meat.

‎07-27-2007 06:00 AM

Re: Problem with oracle 10g installation on hp-ux

It looks like you do an upgrade and the upgrade require Oracle Universal Installer [OUI] with version higher than you have.

HTH

Entities are not to be multiplied beyond necessity - RTFM

‎07-27-2007 01:51 PM

Re: Problem with oracle 10g installation on hp-ux

If you are installing on HPUX 11iV3, please adjust script to validate 11iv3

Where can I install NIS+ for 10.20 from?

‎07-27-2007 06:03 PM

Re: Problem with oracle 10g installation on hp-ux

hi,

Run the RDA script [which is available from Metalink] to validate your environment. The RDA will list down all the requirement and any changes that would be required at the OS level. Once completed, you can launch the installation.

Can you post the log found in: /var/opt/oracle/logs/ e.g. installActions2007-07-26_03-33-34PM.log

kind regards yogeeraj

No person was ever honoured for what he received. Honour has been the reward for what he gave [clavin coolidge]

Installation on Windows 7 or 8 will return operating system version compatibility error. However, there will not be any such issue during installation on older version of Windows operating system.

You can see whole Oracle 10g installation video on My youtube channel :

Let’s start with the installation process.

Step 1:

Oracle 10g installation is done via Oracle Universal Installer. As mentioned earlier, Installation of Oracle 10g on Windows 7 will return version compatibility error as shown here below

“Checking operating system version: must be 5.0,5.1,5.2 or 6.0. Actual 6.1”

Do not panic, you will only need to edit a couple of files to get the installation working. Let me show you how to handle this in a series of steps.

Step 2:

Locate the file /install/oraparam.ini after you extract the installation zip file to your local computer or external disk.

Step 3:

Change the following to include the version “Actual 6.1” as per the installation. You may see other version numbers as well. Use the appropriate version number for the changes you are going to make.

[Certified Versions]

You can customise error message shown for failure, provide value for CERTIFIED_VERSION_FAILURE_MESSAGE

Windows=5.0,5.1,5.2,6.0

Change to [Certified Versions] # You can customise error message shown for failure, provide value for CERTIFIED_VERSION_FAILURE_MESSAGE Windows = 5.0,5.1,5.2,6.0,6.1

Step 4:

Add this additional block needed [Windows-6.1-required] # Minimum display colours for OUI to run MIN_DISPLAY_COLORS = 256 # Minimum CPU speed required for OUI # CPU = 300

Step 5:

You will need to add Windows 7 compatabilty entries in databasestageprereqdbrefhost.xml and databasestageprereqdb_prereqsdb refhost.xml.

Find the following entries and insert the following . Keep in mind that 6.1 for VERSION VALUE is based on the version we are using in this tutorials. Use the appropriate version number based on the error message you get.

Here is entry for “CERTIFIED_SYSTEMS” block adding the entry for Windows 7.

Note: If any of the entries does not match the Operating System version then you will see the following error after the installation starts for “Checking operating system requirements step”

Step 6:

Save the modified files and restart the installation running setup.exe. You will see the messages as shown here below

Step 7:

Change Oracle Home location and select the Installation type. If you are not planning to use the starter database then you need to uncheck the “Create Starter Database [additional 720MB] check box option Enter the database name and password.

Step 8:

Click “Next” to continue with the installation. If you encounter any status with Error[s] during “Product-Specific Prerequisite Checks” then you need to check further before you can continue with the installation; otherwise your Oracle Server may not work.

Step 9:

As soon as all the requirements gets verified and the errors are eliminated, You will see the “Succeeded” status as below screen shot for all the Product-Specific Prerequisite checks.

It is assumed that this is a fresh install so no other Oracle products should be installed at this time.

In this screen, the Source and Destination locations must be selected.

The Source path should reflect either your CD-ROM or the directory in which you unzipped the source files. Leave this as the default. In the example above, the source files were unzipped into c:DOCUME~1HARILOCALS~1temprar$ex12.1593diskstageproduct.xml.

For the Destination, leave the Oracle Home named oraDb10g_home1 as the default. Choose a hard disk drive that has at least 6 gigabytes of free space. In the example here, we are using the E: drive.

Leave the Oracleproduct10.1.0db_1 path as it is [the default]. If you must change this to a different drive, only change the drive letter and not the directories.

Click on the Next button to select installation type. This may take up to 2 minutes [depending on the speed of your machine]. Once the product information has been read, the following 3 "Available Products" options are presented:

After selecting the type click on the next button to get the screen:

For this install, we chose the "General Purpose" Database option. Click on the Next button to continue.

The next step is to identify the database using the Global database name

Keep the default names for GLOBAL and the SID Otherwise, use the following [make a note of these for later on]: Global Database Name is orcl, Oracle SID is orcl

Click on the Next button to continue to the "database file storage option" screen

In this step, you need to select where the Oracle data files will be located. In large operations, we typically keep the data files on a separate disk [or disks], however, for this install, keep the default storage

Click on the Next button to move to the "Summary" screen:

In this screen [shown above], the products and files that will be installed are summarized. Note that in this example, it will take 1.5 GB MB of disk space for the installation of the software. Additional space will be required for the default database.

If everything looks OK at this point, click on the Install button to begin the installation.

During the install, you will notice various Oracle products being copied over to the hard disk.

Once the installation is completed, the next step will be to configure the various additional services and the database.

The following tools will be automatically starts and it is optional. It is recommended, although not required

Click on the next button .The Oracle Database Configuration Assistant will appear for some time while the default database is created and opened. As below

Once the default database has been installed, the following screen will appear

Click on the Password Management button and change the default passwords for the SYS, SYSTEM, SCOTT and DBSNMP accounts as shown below:

Click the OK button to complete the installation. The following screen will be appears:

After completion of installation .reboot your computer.

To Remove the Oracle Products

Go to start menu – > programs – > orcle-oradb10g_home5 – >oracle installation products – > Click the universal installer, the screen will appears as below

click the button installed product. to see the installed products. you will see the screen as below

Click the button remove to remove the oracle products or you can remove directly on clicking deinstall product button in welcome page.

You can see whole Oracle 10g installation video on My youtube channel :

Testing Installation

Go to start menu – > programs – >oracle-oradb10g_home5 – >application development -> click on the sql plus.

It will appears like the screen below, Once SQL Plus is running, you will be prompted for 3 things: Username, password and Host String.

Fill in the Username and password fields with the SYSTEM account and leave the Host String field blank. Since we are connecting to a local Oracle database, no Host String is required. Click on the OK button as shown below:

If the database is running and the username and password are typed correctly, SQL*Plus should log the SYSTEM user in and present the SQL>prompt as shown below

Uninstalling Oracle 10g

Following step will describes the uninstallation of oracle 10g:

First you have to remove all the oracle products by using oracle universal installer Go to start button -> programs -> oracle-oraDb10g_home1 -> oracle installation products -> click on the universal installer. You will get welcome screen, click on the deinstall products

To remove the oracle products. After uninstall the products. Now you have to remove all the remaining oracle products manually run this command regedit.exe. You will get registry editor.

Find related to oracle by using ctrl+f and remove all you find related to oracle, Do this again and again until you get no search. After completing this, reboot your system