Đánh giá tp link archer c2

M5350 của TP-LINK là thiết bị tiên phong trong việc chia sẻ mạng 3G không dây. Được trang bị giao thức WCDMA bên trong hỗ trợ cho modem 3G, chỉ đơn giản cắm thẻ SIM 3G vào để tạo một điểm truy cập 3G Wi-Fi ngay lập tức mà không cần bất cứ thiết bị rườm rà nào.

Show

    Sản Phẩm Bộ phát WIFI - Router Wifi Hãng sản xuất TP-Link ModelArcher C2 TÍNH NĂNG PHẦN CỨNG Giao diện 4 x cổng LAN 10/100/1000Mbps 1 x cổng WAN 10/100/1000Mbps Nút Nút WPS/Reset Nút Mở/Tắt Wi-Fi Nút Mở/Tắt nguồn Bộ cấp nguồn bên ngoài (EU) 9V/0.85A(EU), 12V/1A(US) Kích thước ( R x D x C ) 9.1 x 5.7 x 1.4 in. (230 x 144 x 35mm) Ăng ten 2 x ăng ten băng tần 2.4GHz 1 x ăng ten băng tần kép 2.4GHz & 5GHz Dạng Ăng ten 2 x ăng ten 2.4GHz 1 x ăng ten băng tần kép 5GHz & 2.4GHz TÍNH NĂNG WI-FI Chuẩn Wi-Fi IEEE 802.11ac/n/a 5GHz IEEE 802.11b/g/n 2.4GHz Băng tần 2.4GHz và 5GHz Tốc độ tín hiệu 5GHz: Lên đến 433Mbps (Chỉ với bộ chuyển đổi không dây 11AC); Lên đến 150Mbps với bộ chuyển đổi không dây 11N 2.4GHz: Lên đến 450Mbps Reception Sensitivity 5GHz: 11a 54M: -76dBm; 11ac VHT20 MCS8: -70dBm; 11ac VHT40 MCS9: -65.5dBm; 11ac VHT80 MCS9: -61.5dBm 2.4GHz: 11g 54M: -76dBm11n; HT20 MCS7: -74dBm; 11n HT40 MCS7: -71dBm Công suất truyền tải CE: <20dBm(2.4GHz) <23dBm(5GHz) Tính năng Wi-Fi Mở/Tắt sóng Wi-Fi, Cầu nối WDS, WMM, thống kê Wi-Fi Bảo mật Wi-Fi Mã hóa 64/128-bit WEP,WPA / WPA2,WPA-PSK/ WPA2-PSK TÍNH NĂNG PHẦN MỀM Chất lượng dịch vụ WMM, kiểm soát băng thông Dạng WAN IP Động/ IP Tĩnh/ PPPoE/ PPTP (truy cập kép)/ L2TP (truy cập kép)/BigPond Quản lý Kiểm soát truy cập Quản lý nội bộ Quản lý từ xa DHCP Máy chủ, Máy khách, Danh sách DHCP máy khách, Dành riêng địa chỉ Port Forwarding Máy chủ ảo, Cổng kích hoạt, UPnP, DMZ Dynamic DNS DynDns, Comexe, NO-IP VPN Pass-Through PPTP, L2TP, IPSec Kiểm soát truy cập Quyền kiểm soát của phụ huynh, kiểm soát quản lý nội bộ, Danh sách máy chủ, Thời gian biểu truy cập, Quản lý điều luật Bảo mật tường lửa Tường lửa DoS, SPI Lọc địa chỉ IP/ Lọc địa chỉ MAC/ Lọc tên miền liên kết địa chỉ MAC và IP Giao thức Hỗ trợ IPv4 và IPv6 USB Sharing Hỗ trợ Samba(lưu trữ)/ Máy chủ FTP/ Máy chủ Media/ Máy chủ máy in Mạng khách 1 x mạng khách 2.4GHz 1 x mạng khách 5GHz KHÁC Chứng chỉ CE, FCC, RoHS Sản phẩm bao gồm Router Băng tần kép Wi-Fi AC900 Archer C2 Bộ cấp nguồn Cáp Ethernet RJ45 Hướng dẫn cài đặt nhanh System Requirements Windows 10/8.1/8/7/Vista/XP.Mac OS hoặc hệ điều hàng Linux Môi trường Nhiệt độ hoạt động: 0℃~40 ℃ (32 ℉~104℉) Nhiệt độ lưu trữ: -40℃~70 ℃ (-40 ℉~158℉) Độ ẩm hoạt động: 10%~90% không ngưng tụ Độ ẩm lưu trữ: 5%~90% không ngưng tụ

    The TP-Link Archer C2 is a dual-band wireless router that offers support for both 802.11ac and 802.11n Wi-Fi standards. In terms of speed, the router is capable of delivering up to three times the N speed router. In addition to fast speed, the router also offers robust security and a more powerful frequency. If your current router is unable to solve congestion issues due to multiple users or you’re simply looking to fasten things up on your multimedia network, then investing in 802.11ac is a step in the right direction.

    Design

    It is a saucer-shaped router with two detachable antennas on the rear of the device. The router is attractively designed and is meant to be used on a flat surface. An array of indicator lights is included on the front top of the router to display different statuses, such as power and Internet connectivity.

    Features

    The two detachable antennas work to provide stable omni-directional signals and superior coverage. While the coverage is optimal within the 10-meter range, you may experience weaker signal at longer distances. On the other hand, an obstruction, such as wall can also affect the quality of signal.

    It has four gigabit Ethernet ports and one gigabit LAN port for connecting to wired devices and an Internet source respectively. The gigabit ports are capable of delivering up to 10 times the speed of regular ports.

    It comes with a single USB port that allows you to connect the router to an external storage device or a printer. As opposed to other competing routers with two USB ports, it only features a single USB port, which may be problematic if you plan on connecting the router to a printer and an external storage device at the same time.

    The dual-band router offers up to 300Mbps on the 2.4GHz band and 433Mbps on the 5GHz band, ensuring a delay-free workrate. While the 2.4GHz band tackles small tasks, such as Internet browsing and email, the more intense tasks are supported by the 5GHz band.

    It also features guest network access through secure Wi-Fi access. This lets you share your network without having to reveal your personal data.

    It comes with useful parental control features that allow you to restrict access to certain users. This feature can be used by parents or an office administrator to restrict Internet access to certain users, such as kids or staff members.

    TP-Link is IPv6 compatible. It prioritizes the router resources to ensure uninterrupted access even when watching movies or playing online games.

    Setup

    Setting up the router is a simple task. The installation CD comes in the router box. It offers a step by step installation process that makes it easy for non-technical users to configure the device. The entire setup can be completed in no more than 5 minutes of your time.

    You can also access the Web interface of the router for advanced settings. The default IP address for the router is 192.168.1.1. It will prompt you for username and password. The default value for both fields is ‘admin’.

    Verdict

    It is a reliable router that comes at an affordable price tag. It delivers decent performance and has a stable signal. The dual band router is capable of supporting both the ac and n clients, which is an added plus. The features make the Archer C2 a good choice for your home or small office network.