Quyền được cấp để sao chép, phân phối và/hoặc sửa đổi tài liệu này theo các điều khoản của Giấy phép Tài liệu Tự do GNU, Phiên bản 1. 3 hoặc bất kỳ phiên bản nào mới hơn do Tổ chức Phần mềm Tự do xuất bản; . A copy of the license is included in the section entitled “GNU Free Documentation License”
1. Giới thiệu
sed -i 's/hello/world/' file.txt22 is a stream editor. A stream editor is used to perform basic text transformations on an input stream [a file or input from a pipeline]. While in some ways similar to an editor which permits scripted edits [such as
sed -i 's/hello/world/' file.txt24],
sed -i 's/hello/world/' file.txt22 works by making only one pass over the input[s], and is consequently more efficient. Nhưng khả năng lọc văn bản theo đường dẫn của
sed -i 's/hello/world/' file.txt22 đặc biệt phân biệt nó với các loại trình chỉnh sửa khác
2 Running sed
This chapter covers how to run
sed -i 's/hello/world/' file.txt22. Details of
sed -i 's/hello/world/' file.txt22 scripts and individual
sed -i 's/hello/world/' file.txt22 commands are discussed in the next chapter
2. 1 Overview
Normally
sed -i 's/hello/world/' file.txt22 is invoked like this
For example, to replace all occurrences of ‘hello’ to ‘world’ in the file input. txt
sed 's/hello/world/' input.txt > output.txt
If you do not specify INPUTFILE, or if INPUTFILE is -,
sed -i 's/hello/world/' file.txt22 filters the contents of the standard input. The following commands are equivalent
sed -i 's/hello/world/' file.txt0
sed -i 's/hello/world/' file.txt22 writes output to standard output. Use -i to edit files in-place instead of printing to standard output. See also the
sed -i 's/hello/world/' file.txt33 and
sed -i 's/hello/world/' file.txt34 commands for writing output to other files. Lệnh sau sửa đổi tệp. txt và không tạo ra bất kỳ đầu ra nào
sed -i 's/hello/world/' file.txt
Theo mặc định,
sed -i 's/hello/world/' file.txt22 in tất cả đầu vào đã xử lý [ngoại trừ đầu vào đã bị sửa đổi/xóa bởi các lệnh như
sed -i 's/hello/world/' file.txt36]. Sử dụng -n để chặn đầu ra và lệnh
sed -i 's/hello/world/' file.txt37 để in các dòng cụ thể. Lệnh sau chỉ in dòng 45 của tệp đầu vào
sed -i 's/hello/world/' file.txt22 coi nhiều tệp đầu vào là một luồng dài. Ví dụ sau in dòng đầu tiên của tệp đầu tiên [một. txt] và dòng cuối cùng của tệp cuối cùng [ba. txt]. Sử dụng -s để đảo ngược hành vi này
sed -i 's/hello/world/' file.txt9
Không có tùy chọn -e hoặc -f,
sed -i 's/hello/world/' file.txt22 sử dụng tham số không phải tùy chọn đầu tiên làm tập lệnh và các tham số không phải tùy chọn sau làm tệp đầu vào. Nếu các tùy chọn -e hoặc -f được sử dụng để chỉ định tập lệnh, tất cả các tham số không phải tùy chọn sẽ được lấy làm tệp đầu vào. Các tùy chọn -e và -f có thể được kết hợp và có thể xuất hiện nhiều lần [trong trường hợp đó, tập lệnh hiệu quả cuối cùng sẽ là tập lệnh nối của tất cả các tập lệnh riêng lẻ]
Các ví dụ sau là tương đương
sed -i 's/hello/world/' file.txt1
2. 2 tùy chọn dòng lệnh
Định dạng đầy đủ để gọi
sed -i 's/hello/world/' file.txt22 là
sed -i 's/hello/world/' file.txt3
sed -i 's/hello/world/' file.txt22 có thể được gọi với các tùy chọn dòng lệnh sau
sed -i 's/hello/world/' file.txt42
In ra phiên bản
sed -i 's/hello/world/' file.txt22 đang chạy và thông báo bản quyền, sau đó thoát ra
sed -i 's/hello/world/' file.txt44
In thông báo sử dụng tóm tắt ngắn gọn các tùy chọn dòng lệnh này và địa chỉ báo cáo lỗi, sau đó thoát
_______045____046____047Theo mặc định,
sed -i 's/hello/world/' file.txt22 in ra không gian mẫu ở cuối mỗi chu kỳ thông qua tập lệnh [xem Cách thức hoạt động của
sed -i 's/hello/world/' file.txt22]. Các tùy chọn này vô hiệu hóa tính năng in tự động này và
sed -i 's/hello/world/' file.txt22 chỉ tạo đầu ra khi được thông báo rõ ràng thông qua lệnh
sed -i 's/hello/world/' file.txt37
sed -i 's/hello/world/' file.txt52
In chương trình sed đầu vào ở dạng chuẩn và chú thích việc thực thi chương trình
sed -i 's/hello/world/' file.txt6
sed -i 's/hello/world/' file.txt53
sed -i 's/hello/world/' file.txt54
Thêm các lệnh trong tập lệnh vào tập hợp các lệnh sẽ được chạy trong khi xử lý đầu vào
sed -i 's/hello/world/' file.txt55
sed -i 's/hello/world/' file.txt56
Thêm các lệnh có trong tệp script-file vào tập hợp các lệnh sẽ được chạy trong khi xử lý đầu vào
sed -i 's/hello/world/' file.txt57
sed -i 's/hello/world/' file.txt58
Tùy chọn này chỉ định rằng các tệp sẽ được chỉnh sửa tại chỗ. GNU
sed -i 's/hello/world/' file.txt22 thực hiện điều này bằng cách tạo một tệp tạm thời và gửi đầu ra tới tệp này thay vì tới đầu ra tiêu chuẩn. 1
Tùy chọn này ngụ ý -s
Khi đến cuối tệp, tệp tạm thời được đổi tên thành tên gốc của tệp đầu ra. Phần mở rộng, nếu được cung cấp, được sử dụng để sửa đổi tên của tệp cũ trước khi đổi tên tệp tạm thời, do đó tạo bản sao lưu2]
Quy tắc này được tuân theo. nếu phần mở rộng không chứa
sed -i 's/hello/world/' file.txt60, thì phần mở rộng đó sẽ được thêm vào cuối tên tệp hiện tại dưới dạng hậu tố; . Điều này cho phép bạn thêm tiền tố vào tệp sao lưu, thay vì [hoặc thêm vào] hậu tố hoặc thậm chí đặt các bản sao lưu của tệp gốc vào một thư mục khác [miễn là thư mục đó đã tồn tại]
Nếu không có phần mở rộng nào được cung cấp, tệp gốc sẽ bị ghi đè mà không tạo bản sao lưu
Bởi vì -i lấy một đối số tùy chọn, nó không nên được theo sau bởi các tùy chọn ngắn khác
sed -i 's/hello/world/' file.txt62
Tương tự như -E -i không có hậu tố sao lưu - FILE sẽ được chỉnh sửa tại chỗ mà không cần tạo bản sao lưu
sed -i 's/hello/world/' file.txt63
Điều này tương đương với --in-place=E, tạo FILES làm bản sao lưu của FILE
Hãy thận trọng khi sử dụng -n với -i. cái trước tắt tự động in các dòng và cái sau thay đổi tệp tại chỗ mà không cần sao lưu. Được sử dụng bất cẩn [và không có lệnh
sed -i 's/hello/world/' file.txt37 rõ ràng], tệp đầu ra sẽ trống
sed -i 's/hello/world/' file.txt9
sed -i 's/hello/world/' file.txt65
sed -i 's/hello/world/' file.txt66
Chỉ định độ dài ngắt dòng mặc định cho lệnh
sed -i 's/hello/world/' file.txt67. Độ dài bằng 0 [không] có nghĩa là không bao giờ ngắt dòng dài. Nếu không được chỉ định, nó được lấy là 70
sed -i 's/hello/world/' file.txt68
GNU
sed -i 's/hello/world/' file.txt22 bao gồm một số tiện ích mở rộng cho POSIX sed. Để đơn giản hóa việc viết các tập lệnh di động, tùy chọn này sẽ vô hiệu hóa tất cả các tiện ích mở rộng mà tài liệu hướng dẫn sử dụng này, bao gồm cả các lệnh bổ sung. Hầu hết các tiện ích mở rộng đều chấp nhận các chương trình
sed -i 's/hello/world/' file.txt22 nằm ngoài cú pháp do POSIX quy định, nhưng một số trong số chúng [chẳng hạn như hành vi của lệnh
sed -i 's/hello/world/' file.txt71 được mô tả trong Báo cáo lỗi] thực sự vi phạm tiêu chuẩn. Nếu bạn chỉ muốn tắt loại tiện ích mở rộng thứ hai, bạn có thể đặt biến
sed -i 's/hello/world/' file.txt72 thành một giá trị không trống
sed -i 's/hello/world/' file.txt73
sed -i 's/hello/world/' file.txt74
Tùy chọn này khả dụng trên mọi nền tảng, nhưng chỉ hiệu quả khi hệ điều hành phân biệt giữa tệp văn bản và tệp nhị phân. Khi có sự phân biệt như vậy—như trường hợp của MS-DOS, Windows, Cygwin—các tệp văn bản bao gồm các dòng được phân tách bằng ký tự xuống dòng và ký tự nguồn cấp dữ liệu, và
sed -i 's/hello/world/' file.txt22 không thấy CR kết thúc. Khi tùy chọn này được chỉ định,
sed -i 's/hello/world/' file.txt22 sẽ mở các tệp đầu vào ở chế độ nhị phân, do đó không yêu cầu xử lý đặc biệt này và xem xét các dòng kết thúc tại một nguồn cấp dữ liệu
sed -i 's/hello/world/' file.txt77
Tùy chọn này chỉ khả dụng trên các nền tảng hỗ trợ liên kết tượng trưng và chỉ có tác dụng nếu tùy chọn -i được chỉ định. Trong trường hợp này, nếu tệp được chỉ định trên dòng lệnh là một liên kết tượng trưng, thì
sed -i 's/hello/world/' file.txt22 sẽ theo liên kết và chỉnh sửa đích cuối cùng của liên kết. Hành vi mặc định là ngắt liên kết tượng trưng để đích liên kết sẽ không bị sửa đổi
sed -i 's/hello/world/' file.txt79
sed -i 's/hello/world/' file.txt80
sed -i 's/hello/world/' file.txt81
Sử dụng các biểu thức chính quy mở rộng thay vì các biểu thức chính quy cơ bản. Biểu thức chính quy mở rộng là những biểu thức mà
sed -i 's/hello/world/' file.txt82 chấp nhận; . Về mặt lịch sử, đây là một phần mở rộng GNU, nhưng phần mở rộng -E đã được thêm vào tiêu chuẩn POSIX [http. // austingroupbugs. lượt xem trên mạng. php?id=528], vì vậy hãy sử dụng -E cho tính di động. GNU sed đã chấp nhận -E như một tùy chọn không có giấy tờ trong nhiều năm và *BSD seds cũng đã chấp nhận -E trong nhiều năm, nhưng các tập lệnh sử dụng -E có thể không chuyển sang các hệ thống cũ hơn khác. Xem Biểu thức chính quy mở rộng
sed -i 's/hello/world/' file.txt83
sed -i 's/hello/world/' file.txt84
Theo mặc định,
sed -i 's/hello/world/' file.txt22 sẽ coi các tệp được chỉ định trên dòng lệnh là một luồng dài liên tục duy nhất. Tiện ích mở rộng GNU
sed -i 's/hello/world/' file.txt22 này cho phép người dùng coi chúng là các tệp riêng biệt. phạm vi địa chỉ [chẳng hạn như '/abc/,/def/'] không được phép mở rộng trên nhiều tệp, số dòng có liên quan đến phần đầu của mỗi tệp,
sed -i 's/hello/world/' file.txt87 đề cập đến dòng cuối cùng của mỗi tệp và các tệp được gọi từ
sed -i 's/hello/world/' file.txt88
sed -i 's/hello/world/' file.txt89
Trong chế độ hộp cát, các lệnh
sed -i 's/hello/world/' file.txt90 bị từ chối - các chương trình chứa chúng sẽ bị hủy bỏ mà không được chạy. Chế độ hộp cát đảm bảo
sed -i 's/hello/world/' file.txt22 chỉ hoạt động trên các tệp đầu vào được chỉ định trên dòng lệnh và không thể chạy các chương trình bên ngoài_______092____093
Bộ đệm cả đầu vào và đầu ra ở mức tối thiểu nhất có thể. [Điều này đặc biệt hữu ích nếu đầu vào đến từ những thứ như 'tail -f' và bạn muốn xem đầu ra được chuyển đổi càng sớm càng tốt. ]
________ 094 ________ 095 ________ 096Coi đầu vào là một tập hợp các dòng, mỗi dòng được kết thúc bằng một byte 0 [ký tự ASCII 'NUL'] thay vì một dòng mới. Tùy chọn này có thể được sử dụng với các lệnh như ‘sort -z’ và ‘find -print0’ để xử lý các tên tệp tùy ý
Nếu không có tùy chọn -e, -f, --expression hoặc --file nào được cung cấp trên dòng lệnh, thì đối số không phải tùy chọn đầu tiên trên dòng lệnh sẽ được coi là tập lệnh sẽ được thực thi
Nếu bất kỳ tham số dòng lệnh nào vẫn còn sau khi xử lý ở trên, các tham số này được hiểu là tên của tệp đầu vào sẽ được xử lý. Tên tệp '-' đề cập đến luồng đầu vào tiêu chuẩn. Đầu vào tiêu chuẩn sẽ được xử lý nếu không có tên tệp nào được chỉ định
2. 3 Trạng thái thoát
Trạng thái thoát bằng 0 cho biết thành công và giá trị khác không cho biết thất bại. GNU
sed -i 's/hello/world/' file.txt22 trả về các giá trị lỗi trạng thái thoát sau0
Hoàn thành thành công
1Lệnh không hợp lệ, cú pháp không hợp lệ, biểu thức chính quy không hợp lệ hoặc lệnh mở rộng GNU
sed -i 's/hello/world/' file.txt22 được sử dụng với --posix2
Không thể mở một hoặc nhiều tệp đầu vào được chỉ định trên dòng lệnh [e. g. nếu không tìm thấy tệp hoặc quyền đọc bị từ chối]. Xử lý tiếp tục với các tập tin khác
4Lỗi I/O hoặc lỗi xử lý nghiêm trọng trong thời gian chạy, GNU
sed -i 's/hello/world/' file.txt22 bị hủy bỏ ngay lập tức
Ngoài ra, các lệnh
sed -i 's/hello/world/' file.txt900 và
sed -i 's/hello/world/' file.txt901 có thể được sử dụng để chấm dứt
sed -i 's/hello/world/' file.txt22 với giá trị mã thoát tùy chỉnh [đây là tiện ích mở rộng GNU
sed -i 's/hello/world/' file.txt22]
sed 's/hello/world/' input.txt > output.txt9
3 tập lệnh sed -i 's/hello/world/' file.txt
22
3. 1 Tổng quan kịch bản sed -i 's/hello/world/' file.txt
22
Chương trình
sed -i 's/hello/world/' file.txt22 bao gồm một hoặc nhiều lệnh
sed -i 's/hello/world/' file.txt22, được truyền vào bởi một hoặc nhiều tùy chọn -e, -f, --expression và --file hoặc đối số không phải tùy chọn đầu tiên nếu không có tùy chọn nào trong số này được sử dụng. Tài liệu này sẽ đề cập đến “tập lệnh”
sed -i 's/hello/world/' file.txt22; . Xem Tổng quan
sed -i 's/hello/world/' file.txt22 lệnh theo cú pháp này
X là lệnh một ký tự
sed -i 's/hello/world/' file.txt22.
sed -i 's/hello/world/' file.txt911 là một địa chỉ dòng tùy chọn. Nếu
sed -i 's/hello/world/' file.txt911 được chỉ định, lệnh X sẽ chỉ được thực hiện trên các dòng phù hợp.
sed -i 's/hello/world/' file.txt911 có thể là số dòng đơn, biểu thức chính quy hoặc dải dòng [xem địa chỉ sed].
sed -i 's/hello/world/' file.txt914 bổ sung được sử dụng cho một số lệnh
sed -i 's/hello/world/' file.txt22
Ví dụ sau xóa dòng 30 đến 35 trong đầu vào.
sed -i 's/hello/world/' file.txt916 là một dải địa chỉ.
sed -i 's/hello/world/' file.txt36 là lệnh xóa
sed -i 's/hello/world/' file.txt04
Ví dụ sau in tất cả đầu vào cho đến khi tìm thấy một dòng bắt đầu bằng từ 'foo'. Nếu dòng đó được tìm thấy,
sed -i 's/hello/world/' file.txt22 sẽ kết thúc với trạng thái thoát 42. Nếu dòng đó không được tìm thấy [và không có lỗi nào khác xảy ra],
sed -i 's/hello/world/' file.txt22 sẽ thoát với trạng thái 0.
sed -i 's/hello/world/' file.txt920 là một địa chỉ biểu thức chính quy.
sed -i 's/hello/world/' file.txt900 là lệnh thoát.
sed -i 's/hello/world/' file.txt922 là tùy chọn lệnh
sed -i 's/hello/world/' file.txt00
Các lệnh trong tập lệnh hoặc tệp tập lệnh có thể được phân tách bằng dấu chấm phẩy [
sed -i 's/hello/world/' file.txt923] hoặc dòng mới [ASCII 10]. Nhiều tập lệnh có thể được chỉ định với các tùy chọn -e hoặc -f
Các ví dụ sau đây đều tương đương. Họ thực hiện hai hoạt động
sed -i 's/hello/world/' file.txt22. xóa bất kỳ dòng nào khớp với biểu thức chính quy
sed -i 's/hello/world/' file.txt920 và thay thế tất cả các lần xuất hiện của chuỗi 'xin chào' bằng 'thế giới'
sed -i 's/hello/world/' file.txt01
Các lệnh
sed -i 's/hello/world/' file.txt926,
sed -i 's/hello/world/' file.txt927,
sed -i 's/hello/world/' file.txt928, do cú pháp của chúng, không thể theo sau dấu chấm phẩy hoạt động như dấu phân cách lệnh và do đó nên được kết thúc bằng dòng mới hoặc được đặt ở cuối tập lệnh hoặc tệp tập lệnh. Các lệnh cũng có thể được đặt trước các ký tự khoảng trắng không quan trọng tùy chọn. Xem Cú pháp nhiều lệnh
3. 2 sed -i 's/hello/world/' file.txt
22 lệnh tóm tắt
Các lệnh sau được hỗ trợ trong GNU
sed -i 's/hello/world/' file.txt22. Một số là các lệnh POSIX tiêu chuẩn, trong khi một số khác là các phần mở rộng của GNU. Chi tiết và ví dụ cho từng lệnh có trong các phần sau. [Mnemonics] được hiển thị trong ngoặc đơn
sed -i 's/hello/world/' file.txt931
sed -i 's/hello/world/' file.txt932
Nối văn bản sau một dòng
sed -i 's/hello/world/' file.txt933
Nối văn bản sau một dòng [cú pháp thay thế]
sed -i 's/hello/world/' file.txt934
Chi nhánh vô điều kiện để dán nhãn. Nhãn có thể bị bỏ qua, trong trường hợp đó, chu kỳ tiếp theo được bắt đầu
sed -i 's/hello/world/' file.txt935
sed -i 's/hello/world/' file.txt932
Thay thế [thay đổi] dòng bằng văn bản
sed -i 's/hello/world/' file.txt937
Thay thế [thay đổi] dòng bằng văn bản [cú pháp thay thế]
sed -i 's/hello/world/' file.txt36
Xóa không gian mẫu;
sed -i 's/hello/world/' file.txt939
Nếu không gian mẫu chứa các dòng mới, hãy xóa văn bản trong không gian mẫu cho đến dòng mới đầu tiên và bắt đầu lại chu kỳ với không gian mẫu kết quả mà không đọc dòng đầu vào mới
Nếu không gian mẫu không chứa dòng mới, hãy bắt đầu một chu kỳ mới bình thường như thể lệnh
sed -i 's/hello/world/' file.txt36 đã được ban hành
sed -i 's/hello/world/' file.txt941
Thực thi lệnh được tìm thấy trong không gian mẫu và thay thế không gian mẫu bằng đầu ra;
sed -i 's/hello/world/' file.txt942
Thực thi lệnh và gửi đầu ra của nó tới luồng đầu ra. Lệnh có thể chạy trên nhiều dòng, trừ dòng cuối cùng có dấu gạch chéo ngược
sed -i 's/hello/world/' file.txt943
[tên tệp] In tên tệp của tệp đầu vào hiện tại [với một dòng mới ở cuối]
sed -i 's/hello/world/' file.txt944
Thay thế nội dung của không gian mẫu bằng nội dung của không gian giữ
sed -i 's/hello/world/' file.txt945
Nối một dòng mới vào nội dung của không gian mẫu, rồi nối thêm nội dung của không gian giữ vào nội dung của không gian mẫu
sed -i 's/hello/world/' file.txt946
[giữ] Thay thế nội dung của không gian giữ bằng nội dung của không gian mẫu
sed -i 's/hello/world/' file.txt947
Nối một dòng mới vào nội dung của không gian giữ, sau đó nối thêm nội dung của không gian mẫu vào nội dung của không gian giữ
sed -i 's/hello/world/' file.txt948
sed -i 's/hello/world/' file.txt932
chèn văn bản trước một dòng
sed -i 's/hello/world/' file.txt950
chèn văn bản trước một dòng [cú pháp thay thế]
sed -i 's/hello/world/' file.txt67
In không gian mẫu ở dạng rõ ràng
sed -i 's/hello/world/' file.txt952
[tiếp theo] Nếu tính năng tự động in không bị tắt, hãy in không gian mẫu, sau đó, bất kể, thay thế không gian mẫu bằng dòng nhập tiếp theo. Nếu không có thêm đầu vào thì
sed -i 's/hello/world/' file.txt22 sẽ thoát mà không xử lý thêm bất kỳ lệnh nào
sed -i 's/hello/world/' file.txt71
Thêm một dòng mới vào không gian mẫu, sau đó nối dòng đầu vào tiếp theo vào không gian mẫu. Nếu không có thêm đầu vào thì
sed -i 's/hello/world/' file.txt22 sẽ thoát mà không xử lý thêm bất kỳ lệnh nào
sed -i 's/hello/world/' file.txt37
In không gian mẫu
sed -i 's/hello/world/' file.txt957
In không gian mẫu, cho đến mẫu đầu tiên
sed -i 's/hello/world/' file.txt958
[thoát] Thoát
sed -i 's/hello/world/' file.txt22 mà không xử lý thêm bất kỳ lệnh hoặc đầu vào nào
sed -i 's/hello/world/' file.txt960
[thoát] Lệnh này giống như lệnh
sed -i 's/hello/world/' file.txt900, nhưng sẽ không in nội dung của không gian mẫu. Giống như
sed -i 's/hello/world/' file.txt900, nó cung cấp khả năng trả lại mã thoát cho người gọi
sed -i 's/hello/world/' file.txt963
Đọc tên tập tin
sed -i 's/hello/world/' file.txt964
Xếp hàng một dòng tên tệp sẽ được đọc và chèn vào luồng đầu ra ở cuối chu kỳ hiện tại hoặc khi dòng đầu vào tiếp theo được đọc
sed -i 's/hello/world/' file.txt965
[thay thế] Khớp biểu thức chính quy với nội dung của không gian mẫu. Nếu tìm thấy, hãy thay thế chuỗi phù hợp bằng chuỗi thay thế
sed -i 's/hello/world/' file.txt966
[thử nghiệm] Chỉ nhánh để gắn nhãn nếu đã có một sự thay thế
sed -i 's/hello/world/' file.txt967 thành công kể từ khi dòng đầu vào cuối cùng được đọc hoặc nhánh có điều kiện được thực hiện. Nhãn có thể bị bỏ qua, trong trường hợp đó, chu kỳ tiếp theo được bắt đầu
sed -i 's/hello/world/' file.txt968
[thử nghiệm] Chỉ nhánh để gắn nhãn nếu không có thay thế
sed -i 's/hello/world/' file.txt967 thành công nào kể từ khi dòng đầu vào cuối cùng được đọc hoặc nhánh có điều kiện được thực hiện. Nhãn có thể bị bỏ qua, trong trường hợp đó, chu kỳ tiếp theo được bắt đầu
sed -i 's/hello/world/' file.txt970
[phiên bản] Lệnh này không làm gì, nhưng làm cho
sed -i 's/hello/world/' file.txt22 không thành công nếu tiện ích mở rộng GNU
sed -i 's/hello/world/' file.txt22 không được hỗ trợ hoặc nếu phiên bản được yêu cầu không có sẵn
sed -i 's/hello/world/' file.txt973
Viết không gian mẫu vào tên tệp
sed -i 's/hello/world/' file.txt974
Ghi vào tên tệp đã cho phần không gian mẫu cho đến dòng mới đầu tiên
sed -i 's/hello/world/' file.txt975
Trao đổi nội dung của không gian giữ và mẫu
sed -i 's/hello/world/' file.txt976
Chuyển ngữ bất kỳ ký tự nào trong không gian mẫu khớp với bất kỳ ký tự nguồn nào với ký tự tương ứng trong ký tự đích
sed -i 's/hello/world/' file.txt977
[zap] Lệnh này làm trống nội dung của không gian mẫu
sed -i 's/hello/world/' file.txt978
Một nhận xét, cho đến dòng mới tiếp theo
sed -i 's/hello/world/' file.txt979
Nhóm một số lệnh lại với nhau
sed -i 's/hello/world/' file.txt980
In số dòng đầu vào hiện tại [với một dòng mới ở cuối]
sed -i 's/hello/world/' file.txt981
Chỉ định vị trí của nhãn cho các lệnh nhánh [______1982,
sed -i 's/hello/world/' file.txt983,
sed -i 's/hello/world/' file.txt984]
3. 3 Lệnh sed -i 's/hello/world/' file.txt
967
Lệnh
sed -i 's/hello/world/' file.txt967 [để thay thế] có lẽ là lệnh quan trọng nhất trong
sed -i 's/hello/world/' file.txt22 và có rất nhiều tùy chọn khác nhau. Cú pháp của lệnh
sed -i 's/hello/world/' file.txt967 là ‘s/regexp/replacement/flags’
Khái niệm cơ bản của nó là đơn giản. lệnh
sed -i 's/hello/world/' file.txt967 cố gắng khớp không gian mẫu với biểu thức chính quy được cung cấp;
Để biết chi tiết về cú pháp biểu thức chính quy, hãy xem Địa chỉ biểu thức chính quy
Phần thay thế có thể chứa các tham chiếu
sed -i 's/hello/world/' file.txt990 [n là một số từ 1 đến 9], tham chiếu đến phần trùng khớp được chứa giữa
sed -i 's/hello/world/' file.txt991 thứ n và
sed -i 's/hello/world/' file.txt992 trùng khớp của nó. Ngoài ra, phần thay thế có thể chứa các ký tự
sed -i 's/hello/world/' file.txt993 chưa thoát tham chiếu đến toàn bộ phần khớp của không gian mẫu
Các ký tự
sed -i 's/hello/world/' file.txt994 có thể được thay thế thống nhất bằng bất kỳ ký tự đơn nào khác trong bất kỳ lệnh
sed -i 's/hello/world/' file.txt967 nào. Ký tự
sed -i 's/hello/world/' file.txt994 [hoặc bất kỳ ký tự nào khác được sử dụng thay cho nó] chỉ có thể xuất hiện trong biểu thức chính quy hoặc thay thế nếu nó đứng trước ký tự
sed -i 's/hello/world/' file.txt997
Cuối cùng, với tư cách là tiện ích mở rộng GNU
sed -i 's/hello/world/' file.txt22, bạn có thể bao gồm một chuỗi đặc biệt được tạo bằng dấu gạch chéo ngược và một trong các chữ cái
sed -i 's/hello/world/' file.txt999,
sed -i 's/hello/world/' file.txt67,
sed -i 's/hello/world/' file.txt101,
sed -i 's/hello/world/' file.txt102 hoặc
sed -i 's/hello/world/' file.txt103. Ý nghĩa như sau
sed -i 's/hello/world/' file.txt104
Biến thay thế thành chữ thường cho đến khi tìm thấy
sed -i 's/hello/world/' file.txt105 hoặc
sed -i 's/hello/world/' file.txt106,
sed -i 's/hello/world/' file.txt107
Biến ký tự tiếp theo thành chữ thường,
sed -i 's/hello/world/' file.txt105
Chuyển từ thay thế sang chữ hoa cho đến khi tìm thấy
sed -i 's/hello/world/' file.txt104 hoặc
sed -i 's/hello/world/' file.txt106,
sed -i 's/hello/world/' file.txt111
Chuyển ký tự tiếp theo thành chữ hoa,
sed -i 's/hello/world/' file.txt106
Dừng chuyển đổi trường hợp bắt đầu bởi
sed -i 's/hello/world/' file.txt104 hoặc
sed -i 's/hello/world/' file.txt105
Khi cờ
sed -i 's/hello/world/' file.txt944 đang được sử dụng, chuyển đổi trường hợp không lan truyền từ một lần xuất hiện của biểu thức chính quy sang một lần khác. Ví dụ: khi lệnh sau được thực thi với 'a-b-' trong không gian mẫu
đầu ra là 'axxB'. Khi thay thế '-' đầu tiên, chuỗi '\ u' chỉ ảnh hưởng đến thay thế trống của '\ 1'. Nó không ảnh hưởng đến ký tự
sed -i 's/hello/world/' file.txt975 được thêm vào không gian mẫu khi thay thế
sed -i 's/hello/world/' file.txt117 bằng
sed -i 's/hello/world/' file.txt118
Mặt khác,
sed -i 's/hello/world/' file.txt107 và
sed -i 's/hello/world/' file.txt111 ảnh hưởng đến phần còn lại của văn bản thay thế nếu theo sau chúng là một thay thế trống. Với 'a-b-' trong không gian mẫu, lệnh sau
sẽ thay thế '-' bằng 'X' [chữ hoa] và 'b-' bằng 'Bx'. If this behavior is undesirable, you can prevent it by adding a ‘\E’ sequence—after ‘\1’ in this case
Để bao gồm một ký tự
sed -i 's/hello/world/' file.txt997,
sed -i 's/hello/world/' file.txt993 hoặc dòng mới trong phần thay thế cuối cùng, hãy đảm bảo đặt trước
sed -i 's/hello/world/' file.txt997,
sed -i 's/hello/world/' file.txt993 hoặc dòng mới mong muốn trong phần thay thế bằng một
sed -i 's/hello/world/' file.txt997
Lệnh
sed -i 's/hello/world/' file.txt967 có thể được theo sau bởi 0 hoặc nhiều cờ sau
sed -i 's/hello/world/' file.txt944
Áp dụng thay thế cho tất cả các kết quả phù hợp với biểu thức chính quy, không chỉ lần đầu tiên
sed -i 's/hello/world/' file.txt128
Chỉ thay thế trận đấu số của regrec
tương tác trong lệnh
sed -i 's/hello/world/' file.txt967 Lưu ý. tiêu chuẩn POSIX không chỉ định điều gì sẽ xảy ra khi bạn kết hợp công cụ sửa đổi số và số
sed -i 's/hello/world/' file.txt944 và hiện tại không có ý nghĩa thống nhất rộng rãi trên toàn bộ triển khai
sed -i 's/hello/world/' file.txt22. Đối với GNU
sed -i 's/hello/world/' file.txt22, tương tác được xác định là. bỏ qua các kết quả khớp trước số, sau đó khớp và thay thế tất cả các kết quả khớp từ số trở đi
sed -i 's/hello/world/' file.txt37
Nếu thay thế đã được thực hiện, sau đó in không gian mẫu mới
Ghi chú. khi cả hai tùy chọn
sed -i 's/hello/world/' file.txt37 và
sed -i 's/hello/world/' file.txt941 được chỉ định, thứ tự tương đối của hai tùy chọn tạo ra kết quả rất khác nhau. Nói chung,
sed -i 's/hello/world/' file.txt136 [đánh giá rồi in] là điều bạn muốn, nhưng thao tác ngược lại có thể hữu ích cho việc gỡ lỗi. Vì lý do này, phiên bản hiện tại của GNU
sed -i 's/hello/world/' file.txt22 diễn giải đặc biệt sự hiện diện của các tùy chọn
sed -i 's/hello/world/' file.txt37 cả trước và sau
sed -i 's/hello/world/' file.txt941, in không gian mẫu trước và sau khi đánh giá, trong khi nói chung các cờ cho lệnh
sed -i 's/hello/world/' file.txt967 chỉ hiển thị tác dụng của chúng một lần. Hành vi này, mặc dù được ghi lại, có thể thay đổi trong các phiên bản sau
sed -i 's/hello/world/' file.txt973
Nếu thay thế được thực hiện, sau đó ghi kết quả vào tệp được đặt tên. Là một tiện ích mở rộng GNU
sed -i 's/hello/world/' file.txt22, hai giá trị đặc biệt của tên tệp được hỗ trợ. /dev/stderr, ghi kết quả vào lỗi tiêu chuẩn và /dev/stdout, ghi vào đầu ra tiêu chuẩn. 3
sed -i 's/hello/world/' file.txt941
Lệnh này cho phép một người chuyển đầu vào từ lệnh shell sang không gian mẫu. Nếu thay thế được thực hiện, lệnh được tìm thấy trong không gian mẫu được thực thi và không gian mẫu được thay thế bằng đầu ra của nó. Một dòng mới ở cuối bị chặn; . Đây là tiện ích mở rộng GNU
sed -i 's/hello/world/' file.txt22
sed -i 's/hello/world/' file.txt145
sed -i 's/hello/world/' file.txt928
Công cụ sửa đổi
sed -i 's/hello/world/' file.txt145 để so khớp biểu thức chính quy là một tiện ích mở rộng GNU làm cho
sed -i 's/hello/world/' file.txt22 khớp với biểu thức chính quy theo cách không phân biệt chữ hoa chữ thường
sed -i 's/hello/world/' file.txt149
sed -i 's/hello/world/' file.txt150
Công cụ sửa đổi
sed -i 's/hello/world/' file.txt149 để khớp biểu thức chính quy là một tiện ích mở rộng GNU
sed -i 's/hello/world/' file.txt22 hướng GNU
sed -i 's/hello/world/' file.txt22 khớp biểu thức chính quy ở chế độ nhiều dòng. Công cụ sửa đổi làm cho
sed -i 's/hello/world/' file.txt154 và
sed -i 's/hello/world/' file.txt87 khớp tương ứng [ngoài hành vi bình thường] chuỗi trống sau một dòng mới và chuỗi trống trước một dòng mới. Có các chuỗi ký tự đặc biệt [
sed -i 's/hello/world/' file.txt156 và
sed -i 's/hello/world/' file.txt157] luôn khớp với phần đầu hoặc phần cuối của bộ đệm. Ngoài ra, ký tự dấu chấm không khớp với ký tự dòng mới ở chế độ nhiều dòng
3. 4 lệnh thường dùng
Nếu bạn hoàn toàn sử dụng
sed -i 's/hello/world/' file.txt22, rất có thể bạn sẽ muốn biết các lệnh này
sed -i 's/hello/world/' file.txt978
[Không cho phép địa chỉ. ]
Nhân vật
sed -i 's/hello/world/' file.txt978 bắt đầu bình luận;
Nếu bạn lo lắng về tính di động, hãy lưu ý rằng một số triển khai của
sed -i 's/hello/world/' file.txt22 [không tuân thủ POSIX] chỉ có thể hỗ trợ một nhận xét một dòng và sau đó chỉ khi ký tự đầu tiên của tập lệnh là một
sed -i 's/hello/world/' file.txt978
Cảnh báo. nếu hai ký tự đầu tiên của tập lệnh
sed -i 's/hello/world/' file.txt22 là
sed -i 's/hello/world/' file.txt164, thì tùy chọn -n [no-autoprint] là bắt buộc. Nếu bạn muốn đặt nhận xét trong dòng đầu tiên của tập lệnh và nhận xét đó bắt đầu bằng chữ 'n' và bạn không muốn hành vi này, thì hãy đảm bảo sử dụng chữ 'N' viết hoa hoặc đặt ít nhất một khoảng trắng
sed -i 's/hello/world/' file.txt165
Thoát
sed -i 's/hello/world/' file.txt22 mà không cần xử lý thêm bất kỳ lệnh hoặc đầu vào nào
Thí dụ. dừng lại sau khi in dòng thứ hai
Lệnh này chỉ chấp nhận một địa chỉ. Lưu ý rằng không gian mẫu hiện tại được in nếu tính năng in tự động không bị tắt với tùy chọn -n. Khả năng trả lại mã thoát từ tập lệnh
sed -i 's/hello/world/' file.txt22 là phần mở rộng GNU
sed -i 's/hello/world/' file.txt22
Xem thêm lệnh GNU
sed -i 's/hello/world/' file.txt22 tiện ích mở rộng
sed -i 's/hello/world/' file.txt901 thoát âm thầm mà không in không gian mẫu hiện tại
sed -i 's/hello/world/' file.txt36
Xóa không gian mẫu;
Thí dụ. xóa dòng đầu vào thứ hai
sed -i 's/hello/world/' file.txt37
In ra không gian mẫu [đến đầu ra tiêu chuẩn]. Lệnh này thường chỉ được sử dụng cùng với tùy chọn dòng lệnh -n
Thí dụ. chỉ in dòng đầu vào thứ hai
sed -i 's/hello/world/' file.txt952
Nếu tính năng tự động in không bị tắt, hãy in không gian mẫu, sau đó, bất kể, thay thế không gian mẫu bằng dòng nhập tiếp theo. Nếu không có thêm đầu vào thì
sed -i 's/hello/world/' file.txt22 sẽ thoát mà không xử lý thêm bất kỳ lệnh nào
Lệnh này rất hữu ích để bỏ qua các dòng [e. g. xử lý mọi dòng thứ N]
Thí dụ. thực hiện thay thế trên mỗi dòng thứ 3 [i. e. hai lệnh
sed -i 's/hello/world/' file.txt952 bỏ qua hai dòng]
sed -i 's/hello/world/' file.txt02
GNU
sed -i 's/hello/world/' file.txt22 cung cấp cú pháp địa chỉ mở rộng của bước đầu tiên để đạt được kết quả tương tự
sed -i 's/hello/world/' file.txt03
sed -i 's/hello/world/' file.txt177
A group of commands may be enclosed between
sed -i 's/hello/world/' file.txt178 and
sed -i 's/hello/world/' file.txt179 characters. This is particularly useful when you want a group of commands to be triggered by a single address [or address-range] match
Example. perform substitution then print the second input line
sed -i 's/hello/world/' file.txt04
3. 5 Less Frequently-Used Commands
Though perhaps less frequently used than those in the previous section, some very small yet useful
sed -i 's/hello/world/' file.txt22 scripts can be built with these commands
sed -i 's/hello/world/' file.txt181
Chuyển ngữ bất kỳ ký tự nào trong không gian mẫu khớp với bất kỳ ký tự nguồn nào với ký tự tương ứng trong ký tự đích
Example. transliterate ‘a-j’ into ‘0-9’
sed -i 's/hello/world/' file.txt05
[The
sed -i 's/hello/world/' file.txt994 characters may be uniformly replaced by any other single character within any given
sed -i 's/hello/world/' file.txt183 command. ]
Instances of the
sed -i 's/hello/world/' file.txt994 [or whatever other character is used in its stead],
sed -i 's/hello/world/' file.txt997, or newlines can appear in the source-chars or dest-chars lists, provide that each instance is escaped by a
sed -i 's/hello/world/' file.txt997. The source-chars and dest-chars lists must contain the same number of characters [after de-escaping]
See the
sed -i 's/hello/world/' file.txt187 command from GNU coreutils for similar functionality
sed -i 's/hello/world/' file.txt933
Appending text after a line. This is a GNU extension to the standard
sed -i 's/hello/world/' file.txt926 command - see below for details
Example. Add the word ‘hello’ after the second line
sed -i 's/hello/world/' file.txt06
Leading whitespace after the
sed -i 's/hello/world/' file.txt926 command is ignored. The text to add is read until the end of the line
sed -i 's/hello/world/' file.txt931
sed -i 's/hello/world/' file.txt932
Appending text after a line
Example. Add ‘hello’ after the second line [-. indicates printed output lines]
sed -i 's/hello/world/' file.txt07
The
sed -i 's/hello/world/' file.txt926 command queues the lines of text which follow this command [each but the last ending with a
sed -i 's/hello/world/' file.txt997, which are removed from the output] to be output at the end of the current cycle, or when the next input line is read
As a GNU extension, this command accepts two addresses
Trình tự thoát trong văn bản được xử lý, vì vậy bạn nên sử dụng
sed -i 's/hello/world/' file.txt195 trong văn bản để in một dấu gạch chéo ngược
The commands resume after the last line without a backslash [
sed -i 's/hello/world/' file.txt997] - ‘world’ in the following example
sed -i 's/hello/world/' file.txt08
As a GNU extension, the
sed -i 's/hello/world/' file.txt926 command and text can be separated into two
sed -i 's/hello/world/' file.txt198 parameters, enabling easier scripting
sed -i 's/hello/world/' file.txt09
sed -i 's/hello/world/' file.txt950
insert text before a line. This is a GNU extension to the standard
sed -i 's/hello/world/' file.txt928 command - see below for details
Example. Insert the word ‘hello’ before the second line
sed -i 's/hello/world/' file.txt0
Leading whitespace after the
sed -i 's/hello/world/' file.txt928 command is ignored. The text to add is read until the end of the line
sed -i 's/hello/world/' file.txt948
sed -i 's/hello/world/' file.txt932
Immediately output the lines of text which follow this command
Example. Insert ‘hello’ before the second line [-. indicates printed output lines]
sed -i 's/hello/world/' file.txt1
As a GNU extension, this command accepts two addresses
Trình tự thoát trong văn bản được xử lý, vì vậy bạn nên sử dụng
sed -i 's/hello/world/' file.txt195 trong văn bản để in một dấu gạch chéo ngược
The commands resume after the last line without a backslash [
sed -i 's/hello/world/' file.txt997] - ‘world’ in the following example
sed -i 's/hello/world/' file.txt2
As a GNU extension, the
sed -i 's/hello/world/' file.txt928 command and text can be separated into two
sed -i 's/hello/world/' file.txt198 parameters, enabling easier scripting
sed -i 's/hello/world/' file.txt3
sed -i 's/hello/world/' file.txt937
Replaces the line[s] with text. This is a GNU extension to the standard
sed -i 's/hello/world/' file.txt927 command - see below for details
Thí dụ. Thay thế các dòng thứ 2 đến thứ 9 bằng từ 'xin chào'
sed -i 's/hello/world/' file.txt4
Khoảng trắng hàng đầu sau lệnh
sed -i 's/hello/world/' file.txt927 bị bỏ qua. Văn bản cần thêm được đọc cho đến cuối dòng
sed -i 's/hello/world/' file.txt935
sed -i 's/hello/world/' file.txt932
Xóa các dòng khớp với địa chỉ hoặc dải địa chỉ và xuất các dòng văn bản tuân theo lệnh này
Thí dụ. Replace 2nd to 4th lines with the words ‘hello’ and ‘world’ [-. cho biết các dòng đầu ra được in]
sed -i 's/hello/world/' file.txt5
Nếu không có địa chỉ nào được cung cấp, mỗi dòng sẽ được thay thế
Một chu kỳ mới được bắt đầu sau khi lệnh này được thực hiện, vì không gian mẫu sẽ bị xóa. Trong ví dụ sau,
sed -i 's/hello/world/' file.txt927 bắt đầu một chu kỳ mới và lệnh thay thế không được thực hiện trên văn bản đã thay thế
sed -i 's/hello/world/' file.txt6
As a GNU extension, the
sed -i 's/hello/world/' file.txt927 command and text can be separated into two
sed -i 's/hello/world/' file.txt198 parameters, enabling easier scripting
sed -i 's/hello/world/' file.txt7
sed -i 's/hello/world/' file.txt980
Print out the current input line number [with a trailing newline]
sed -i 's/hello/world/' file.txt8
As a GNU extension, this command accepts two addresses
sed -i 's/hello/world/' file.txt317
Print the pattern space in an unambiguous form. non-printable characters [and the
sed -i 's/hello/world/' file.txt997 character] are printed in C-style escaped form; long lines are split, with a trailing
sed -i 's/hello/world/' file.txt997 character to indicate the split; the end of each line is marked with a
sed -i 's/hello/world/' file.txt87
n specifies the desired line-wrap length; a length of 0 [zero] means to never wrap long lines. If omitted, the default as specified on the command line is used. Tham số n là phần mở rộng GNU
sed -i 's/hello/world/' file.txt22
sed -i 's/hello/world/' file.txt963
Reads file filename. Example
sed -i 's/hello/world/' file.txt9
Queue the contents of filename to be read and inserted into the output stream at the end of the current cycle, or when the next input line is read. Note that if filename cannot be read, it is treated as if it were an empty file, without any error indication
As a GNU
sed -i 's/hello/world/' file.txt22 extension, the special value /dev/stdin is supported for the file name, which reads the contents of the standard input
As a GNU extension, this command accepts two addresses. The file will then be reread and inserted on each of the addressed lines
sed -i 's/hello/world/' file.txt973
Write the pattern space to filename. As a GNU
sed -i 's/hello/world/' file.txt22 extension, two special values of filename are supported. /dev/stderr, which writes the result to the standard error, and /dev/stdout, which writes to the standard output. 4
The file will be created [or truncated] before the first input line is read; all
sed -i 's/hello/world/' file.txt326 commands [including instances of the
sed -i 's/hello/world/' file.txt326 flag on successful
sed -i 's/hello/world/' file.txt967 commands] which refer to the same filename are output without closing and reopening the file
sed -i 's/hello/world/' file.txt939
If pattern space contains no newline, start a normal new cycle as if the
sed -i 's/hello/world/' file.txt36 command was issued. Otherwise, delete text in the pattern space up to the first newline, and restart cycle with the resultant pattern space, without reading a new line of input
sed -i 's/hello/world/' file.txt71
Thêm một dòng mới vào không gian mẫu, sau đó nối dòng đầu vào tiếp theo vào không gian mẫu. Nếu không có thêm đầu vào thì
sed -i 's/hello/world/' file.txt22 sẽ thoát mà không xử lý thêm bất kỳ lệnh nào
When -z is used, a zero byte [the ascii ‘NUL’ character] is added between the lines [instead of a new line]
By default
sed -i 's/hello/world/' file.txt22 does not terminate if there is no ’next’ input line. This is a GNU extension which can be disabled with --posix. See N command on the last line
sed -i 's/hello/world/' file.txt957
Print out the portion of the pattern space up to the first newline
sed -i 's/hello/world/' file.txt946
Replace the contents of the hold space with the contents of the pattern space
sed -i 's/hello/world/' file.txt947
Nối một dòng mới vào nội dung của không gian giữ, sau đó nối thêm nội dung của không gian mẫu vào nội dung của không gian giữ
sed -i 's/hello/world/' file.txt944
Thay thế nội dung của không gian mẫu bằng nội dung của không gian giữ
sed -i 's/hello/world/' file.txt945
Nối một dòng mới vào nội dung của không gian mẫu, rồi nối thêm nội dung của không gian giữ vào nội dung của không gian mẫu
sed -i 's/hello/world/' file.txt975
Trao đổi nội dung của không gian giữ và mẫu
3. 6 Commands for sed -i 's/hello/world/' file.txt
22 gurus
In most cases, use of these commands indicates that you are probably better off programming in something like
sed -i 's/hello/world/' file.txt341 or Perl. But occasionally one is committed to sticking with
sed -i 's/hello/world/' file.txt22, and these commands can enable one to write quite convoluted scripts
sed -i 's/hello/world/' file.txt981
[Không cho phép địa chỉ. ]
Specify the location of label for branch commands. In all other respects, a no-op
sed -i 's/hello/world/' file.txt934
Unconditionally branch to label. The label may be omitted, in which case the next cycle is started
sed -i 's/hello/world/' file.txt966
Branch to label only if there has been a successful
sed -i 's/hello/world/' file.txt967ubstitution since the last input line was read or conditional branch was taken. The label may be omitted, in which case the next cycle is started
3. 7 Commands Specific to GNU sed -i 's/hello/world/' file.txt
22
These commands are specific to GNU
sed -i 's/hello/world/' file.txt22, so you must use them with care and only when you are sure that hindering portability is not evil. They allow you to check for GNU
sed -i 's/hello/world/' file.txt22 extensions or to do tasks that are required quite often, yet are unsupported by standard
sed -i 's/hello/world/' file.txt22s
sed -i 's/hello/world/' file.txt351
Lệnh này cho phép một người chuyển đầu vào từ lệnh shell sang không gian mẫu. Without parameters, the
sed -i 's/hello/world/' file.txt941 command executes the command that is found in pattern space and replaces the pattern space with the output; a trailing newline is suppressed
If a parameter is specified, instead, the
sed -i 's/hello/world/' file.txt941 command interprets it as a command and sends its output to the output stream. The command can run across multiple lines, all but the last ending with a back-slash
Trong cả hai trường hợp, kết quả không được xác định nếu lệnh được thực thi chứa ký tự NUL
Lưu ý rằng, không giống như lệnh
sed -i 's/hello/world/' file.txt354, đầu ra của lệnh sẽ được in ngay lập tức;
sed -i 's/hello/world/' file.txt943
In ra tên tệp của tệp đầu vào hiện tại [với một dòng mới ở cuối]
sed -i 's/hello/world/' file.txt357
This command accepts only one address
This command is the same as
sed -i 's/hello/world/' file.txt900, but will not print the contents of pattern space. Like
sed -i 's/hello/world/' file.txt900, it provides the ability to return an exit code to the caller
Lệnh này có thể hữu ích vì các cách thay thế duy nhất để thực hiện chức năng có vẻ tầm thường này là sử dụng tùy chọn -n [có thể làm phức tạp tập lệnh của bạn một cách không cần thiết] hoặc sử dụng đoạn mã sau, điều này làm lãng phí thời gian bằng cách đọc toàn bộ tệp mà không có bất kỳ hiệu ứng rõ ràng nào
sed -i 's/hello/world/' file.txt90
sed -i 's/hello/world/' file.txt964
Queue a line of filename to be read and inserted into the output stream at the end of the current cycle, or when the next input line is read. Note that if filename cannot be read, or if its end is reached, no line is appended, without any error indication
As with the
sed -i 's/hello/world/' file.txt354 command, the special value /dev/stdin is supported for the file name, which reads a line from the standard input
sed -i 's/hello/world/' file.txt968
Branch to label only if there have been no successful
sed -i 's/hello/world/' file.txt967ubstitutions since the last input line was read or conditional branch was taken. The label may be omitted, in which case the next cycle is started
sed -i 's/hello/world/' file.txt364
This command does nothing, but makes
sed -i 's/hello/world/' file.txt22 fail if GNU
sed -i 's/hello/world/' file.txt22 extensions are not supported, simply because other versions of
sed -i 's/hello/world/' file.txt22 do not implement it. In addition, you can specify the version of
sed -i 's/hello/world/' file.txt22 that your script requires, such as
sed -i 's/hello/world/' file.txt369. The default is
sed -i 's/hello/world/' file.txt370 because that is the first version that implemented this command
This command enables all GNU extensions even if
sed -i 's/hello/world/' file.txt72 is set in the environment
sed -i 's/hello/world/' file.txt974
Write to the given filename the portion of the pattern space up to the first newline. Everything said under the
sed -i 's/hello/world/' file.txt326 command about file handling holds here too
sed -i 's/hello/world/' file.txt977
This command empties the content of pattern space. It is usually the same as ‘s/. *//’, but is more efficient and works in the presence of invalid multibyte sequences in the input stream. POSIX mandates that such sequences are not matched by ‘. ’, so that there is no portable way to clear
sed -i 's/hello/world/' file.txt22’s buffers in the middle of the script in most multibyte locales [including UTF-8 locales]
3. 8 Multiple commands syntax
There are several methods to specify multiple commands in a
sed -i 's/hello/world/' file.txt22 program
Using newlines is most natural when running a sed script from a file [using the -f option]
On the command line, all
sed -i 's/hello/world/' file.txt22 commands may be separated by newlines. Alternatively, you may specify each command as an argument to an -e option
sed -i 's/hello/world/' file.txt91
A semicolon [‘;’] may be used to separate most simple commands
sed -i 's/hello/world/' file.txt92
The
sed -i 's/hello/world/' file.txt178,
sed -i 's/hello/world/' file.txt179,
sed -i 's/hello/world/' file.txt982,
sed -i 's/hello/world/' file.txt983,
sed -i 's/hello/world/' file.txt984,
sed -i 's/hello/world/' file.txt383 commands can be separated with a semicolon [this is a non-portable GNU
sed -i 's/hello/world/' file.txt22 extension]
sed -i 's/hello/world/' file.txt93
Labels used in
sed -i 's/hello/world/' file.txt982,
sed -i 's/hello/world/' file.txt983,
sed -i 's/hello/world/' file.txt984,
sed -i 's/hello/world/' file.txt383 commands are read until a semicolon. Leading and trailing whitespace is ignored. In the examples below the label is ‘x’. The first example works with GNU
sed -i 's/hello/world/' file.txt22. The second is a portable equivalent. For more information about branching and labels see Branching and flow control
sed -i 's/hello/world/' file.txt94
3. 8. 1 Commands Requiring a newline
The following commands cannot be separated by a semicolon and require a newline
sed -i 's/hello/world/' file.txt926,
sed -i 's/hello/world/' file.txt927,
sed -i 's/hello/world/' file.txt928 [append/change/insert]
All characters following
sed -i 's/hello/world/' file.txt926,
sed -i 's/hello/world/' file.txt927,
sed -i 's/hello/world/' file.txt928 commands are taken as the text to append/change/insert. Using a semicolon leads to undesirable results
sed -i 's/hello/world/' file.txt95
Separate the commands using -e or a newline
sed -i 's/hello/world/' file.txt96
Note that specifying the text to add [‘Hello’] immediately after
sed -i 's/hello/world/' file.txt926,
sed -i 's/hello/world/' file.txt927,
sed -i 's/hello/world/' file.txt928 is itself a GNU
sed -i 's/hello/world/' file.txt22 extension. A portable, POSIX-compliant alternative is
sed -i 's/hello/world/' file.txt97
sed -i 's/hello/world/' file.txt978 [comment]
All characters following ‘#’ until the next newline are ignored
sed -i 's/hello/world/' file.txt98
sed -i 's/hello/world/' file.txt354,
sed -i 's/hello/world/' file.txt88,
sed -i 's/hello/world/' file.txt326,
sed -i 's/hello/world/' file.txt33 [reading and writing files]
The
sed -i 's/hello/world/' file.txt354,
sed -i 's/hello/world/' file.txt88,
sed -i 's/hello/world/' file.txt326,
sed -i 's/hello/world/' file.txt33 commands parse the filename until end of the line. If whitespace, comments or semicolons are found, they will be included in the filename, leading to unexpected results
sed -i 's/hello/world/' file.txt99
Note that
sed -i 's/hello/world/' file.txt22 silently ignores read/write errors in
sed -i 's/hello/world/' file.txt354,
sed -i 's/hello/world/' file.txt88,
sed -i 's/hello/world/' file.txt326,
sed -i 's/hello/world/' file.txt33 commands [such as missing files]. In the following example,
sed -i 's/hello/world/' file.txt22 tries to read a file named ‘hello. txt ; N’. The file is missing, and the error is silently ignored
sed -i 's/hello/world/' file.txt10
sed -i 's/hello/world/' file.txt941 [command execution]
Any characters following the
sed -i 's/hello/world/' file.txt941 command until the end of the line will be sent to the shell. Nếu tìm thấy khoảng trắng, nhận xét hoặc dấu chấm phẩy, chúng sẽ được đưa vào lệnh trình bao, dẫn đến kết quả không mong muốn
sed -i 's/hello/world/' file.txt11
sed -i 's/hello/world/' file.txt617 [substitute with
sed -i 's/hello/world/' file.txt941 or
sed -i 's/hello/world/' file.txt326 flags]
In a substitution command, the
sed -i 's/hello/world/' file.txt326 flag writes the substitution result to a file, and the
sed -i 's/hello/world/' file.txt941 flag executes the subsitution result as a shell command. As with the
sed -i 's/hello/world/' file.txt622 commands, these must be terminated with a newline. If whitespace, comments or semicolons are found, they will be included in the shell command or filename, leading to unexpected results
sed -i 's/hello/world/' file.txt12
4 Addresses. selecting lines
4. 1 Addresses overview
Addresses determine on which line[s] the
sed -i 's/hello/world/' file.txt22 command will be executed. The following command replaces the word ‘hello’ with ‘world’ only on line 144
sed -i 's/hello/world/' file.txt13
If no addresses are given, the command is performed on all lines. The following command replaces the word ‘hello’ with ‘world’ on all lines in the input file
sed 's/hello/world/' input.txt > output.txt
Addresses can contain regular expressions to match lines based on content instead of line numbers. The following command replaces the word ‘hello’ with ‘world’ only in lines containing the word ‘apple’
sed -i 's/hello/world/' file.txt15
An address range is specified with two addresses separated by a comma [
sed -i 's/hello/world/' file.txt624]. Addresses can be numeric, regular expressions, or a mix of both. The following command replaces the word ‘hello’ with ‘world’ only in lines 4 to 17 [inclusive]
sed -i 's/hello/world/' file.txt16
Appending the
sed -i 's/hello/world/' file.txt625 character to the end of an address specification [before the command letter] negates the sense of the match. That is, if the
sed -i 's/hello/world/' file.txt625 character follows an address or an address range, then only lines which do not match the addresses will be selected. The following command replaces the word ‘hello’ with ‘world’ only in lines not containing the word ‘apple’
sed -i 's/hello/world/' file.txt17
The following command replaces the word ‘hello’ with ‘world’ only in lines 1 to 3 and 18 till the last line of the input file [i. e. excluding lines 4 to 17]
sed -i 's/hello/world/' file.txt18
4. 2 Chọn dòng theo số
Addresses in a
sed -i 's/hello/world/' file.txt22 script can be in any of the following forms
sed -i 's/hello/world/' file.txt128
Specifying a line number will match only that line in the input. [Note that
sed -i 's/hello/world/' file.txt22 counts lines continuously across all input files unless -i or -s options are specified. ]
sed -i 's/hello/world/' file.txt87
This address matches the last line of the last file of input, or the last line of each file when the -i or -s options are specified
sed -i 's/hello/world/' file.txt631
This GNU extension matches every stepth line starting with line first. In particular, lines will be selected when there exists a non-negative n such that the current line-number equals first + [n * step]. Thus, one would use
sed -i 's/hello/world/' file.txt632 to select the odd-numbered lines and
sed -i 's/hello/world/' file.txt633 for even-numbered lines; to pick every third line starting with the second, ‘2~3’ would be used; to pick every fifth line starting with the tenth, use ‘10~5’; and ‘50~0’ is just an obscure way of saying
sed -i 's/hello/world/' file.txt634
The following commands demonstrate the step address usage
sed -i 's/hello/world/' file.txt19
4. 3 selecting lines by text matching
GNU
sed -i 's/hello/world/' file.txt22 supports the following regular expression addresses. The default regular expression is Basic Regular Expression [BRE]. If -E or -r options are used, The regular expression should be in Extended Regular Expression [ERE] syntax. See BRE vs ERE
sed -i 's/hello/world/' file.txt636
This will select any line which matches the regular expression regexp. If regexp itself includes any
sed -i 's/hello/world/' file.txt994 characters, each must be escaped by a backslash [
sed -i 's/hello/world/' file.txt997]
The following command prints lines in /etc/passwd which end with ‘bash’5
sed -i 's/hello/world/' file.txt30
The empty regular expression ‘//’ repeats the last regular expression match [the same holds if the empty regular expression is passed to the
sed -i 's/hello/world/' file.txt967 command]. Note that modifiers to regular expressions are evaluated when the regular expression is compiled, thus it is invalid to specify them together with the empty regular expression
sed -i 's/hello/world/' file.txt640
[The
sed -i 's/hello/world/' file.txt641 may be replaced by any other single character. ]
This also matches the regular expression regexp, but allows one to use a different delimiter than
sed -i 's/hello/world/' file.txt994. This is particularly useful if the regexp itself contains a lot of slashes, since it avoids the tedious escaping of every
sed -i 's/hello/world/' file.txt994. If regexp itself includes any delimiter characters, each must be escaped by a backslash [
sed -i 's/hello/world/' file.txt997]
The following commands are equivalent. They print lines which start with ‘/home/alice/documents/’
sed -i 's/hello/world/' file.txt31
sed -i 's/hello/world/' file.txt645
sed -i 's/hello/world/' file.txt646
The
sed -i 's/hello/world/' file.txt145 modifier to regular-expression matching is a GNU extension which causes the regexp to be matched in a case-insensitive manner
In many other programming languages, a lower case
sed -i 's/hello/world/' file.txt928 is used for case-insensitive regular expression matching. However, in
sed -i 's/hello/world/' file.txt22 the
sed -i 's/hello/world/' file.txt928 is used for the insert command [see insert command]
Observe the difference between the following examples
Trong ví dụ này,
sed -i 's/hello/world/' file.txt651 là địa chỉ. biểu thức chính quy với công cụ sửa đổi
sed -i 's/hello/world/' file.txt145.
sed -i 's/hello/world/' file.txt36 là lệnh xóa
sed -i 's/hello/world/' file.txt32
Đây,
sed -i 's/hello/world/' file.txt654 là địa chỉ. một biểu thức chính quy.
sed -i 's/hello/world/' file.txt928 là lệnh chèn.
sed -i 's/hello/world/' file.txt36 là giá trị cần chèn. Sau đó, một dòng có 'd' được chèn phía trên dòng phù hợp
sed -i 's/hello/world/' file.txt33
sed -i 's/hello/world/' file.txt657
sed -i 's/hello/world/' file.txt658
Công cụ sửa đổi
sed -i 's/hello/world/' file.txt149 để khớp biểu thức chính quy là một tiện ích mở rộng GNU
sed -i 's/hello/world/' file.txt22 hướng GNU
sed -i 's/hello/world/' file.txt22 khớp biểu thức chính quy ở chế độ nhiều dòng. Công cụ sửa đổi làm cho
sed -i 's/hello/world/' file.txt154 và
sed -i 's/hello/world/' file.txt87 khớp tương ứng [ngoài hành vi bình thường] chuỗi trống sau một dòng mới và chuỗi trống trước một dòng mới. Có các chuỗi ký tự đặc biệt [
sed -i 's/hello/world/' file.txt156 và
sed -i 's/hello/world/' file.txt157] luôn khớp với phần đầu hoặc phần cuối của bộ đệm. Ngoài ra, ký tự dấu chấm không khớp với ký tự dòng mới ở chế độ nhiều dòng
Địa chỉ regex hoạt động trên nội dung của không gian mẫu hiện tại. Nếu không gian mẫu bị thay đổi [ví dụ: với lệnh
sed -i 's/hello/world/' file.txt666], khớp biểu thức chính quy sẽ hoạt động trên văn bản đã thay đổi
Trong ví dụ sau, in tự động bị tắt với -n. Lệnh
sed -i 's/hello/world/' file.txt667 thay đổi các dòng chứa '2' thành 'X'. Lệnh
sed -i 's/hello/world/' file.txt668 khớp các dòng có chữ số và in chúng. Bởi vì dòng thứ hai được thay đổi trước biểu thức chính quy
sed -i 's/hello/world/' file.txt669, nó sẽ không khớp và sẽ không được in
sed -i 's/hello/world/' file.txt34
4. 4 dãy địa chỉ
Có thể chỉ định phạm vi địa chỉ bằng cách chỉ định hai địa chỉ được phân tách bằng dấu phẩy [
sed -i 's/hello/world/' file.txt624]. Một dải địa chỉ khớp với các dòng bắt đầu từ nơi địa chỉ đầu tiên khớp và tiếp tục cho đến khi địa chỉ thứ hai khớp [bao gồm]
sed -i 's/hello/world/' file.txt35
Nếu địa chỉ thứ hai là biểu thức chính quy, thì việc kiểm tra kết quả khớp sẽ bắt đầu bằng dòng theo sau dòng khớp với địa chỉ đầu tiên. một phạm vi sẽ luôn kéo dài ít nhất hai dòng [tất nhiên là ngoại trừ nếu luồng đầu vào kết thúc]
sed -i 's/hello/world/' file.txt36
Nếu địa chỉ thứ hai là một số nhỏ hơn [hoặc bằng] dòng khớp với địa chỉ đầu tiên, thì chỉ có một dòng được khớp
sed -i 's/hello/world/' file.txt37
GNU
sed -i 's/hello/world/' file.txt22 cũng hỗ trợ một số biểu mẫu hai địa chỉ đặc biệt;
sed -i 's/hello/world/' file.txt672
Một số dòng của
sed -i 's/hello/world/' file.txt673 có thể được sử dụng trong một đặc tả địa chỉ như
sed -i 's/hello/world/' file.txt672 để
sed -i 's/hello/world/' file.txt22 cũng sẽ cố gắng khớp với biểu thức chính quy trong dòng đầu vào đầu tiên. Nói cách khác,
sed -i 's/hello/world/' file.txt672 tương tự như
sed -i 's/hello/world/' file.txt677, ngoại trừ việc nếu addr2 khớp với dòng đầu tiên của đầu vào, biểu mẫu
sed -i 's/hello/world/' file.txt672 sẽ coi nó là kết thúc phạm vi, trong khi biểu mẫu
sed -i 's/hello/world/' file.txt677 sẽ khớp với phần đầu của phạm vi và do đó làm cho phạm vi mở rộng
Lưu ý rằng đây là nơi duy nhất mà địa chỉ
sed -i 's/hello/world/' file.txt673 có ý nghĩa;
Các ví dụ sau minh họa sự khác biệt giữa bắt đầu bằng địa chỉ 1 và 0
sed -i 's/hello/world/' file.txt38
sed -i 's/hello/world/' file.txt682
So khớp addr1 và N dòng sau addr1
sed -i 's/hello/world/' file.txt39
addr1 có thể là số dòng hoặc biểu thức chính quy
sed -i 's/hello/world/' file.txt683
So khớp addr1 và các dòng theo sau addr1 cho đến dòng tiếp theo có số dòng đầu vào là bội số của N. Lệnh sau in bắt đầu từ dòng 6, cho đến dòng tiếp theo là bội số của 4 [i. e. dòng 8]
sed -i 's/hello/world/' file.txt60
addr1 có thể là số dòng hoặc biểu thức chính quy
5 biểu thức chính quy. chọn văn bản
5. 1 Tổng quan về biểu thức chính quy trong sed -i 's/hello/world/' file.txt
22
Để biết cách sử dụng
sed -i 's/hello/world/' file.txt22, mọi người nên hiểu biểu thức chính quy [viết tắt là regexp]. Biểu thức chính quy là một mẫu được khớp với chuỗi chủ đề từ trái sang phải. Hầu hết các nhân vật đều bình thường. chúng đại diện cho chính chúng theo một mẫu và khớp với các ký tự tương ứng. Biểu thức chính quy trong
sed -i 's/hello/world/' file.txt22 được chỉ định giữa hai dấu gạch chéo
Lệnh sau in các dòng có chứa từ 'hello'
Ví dụ trên tương đương với lệnh
sed -i 's/hello/world/' file.txt687 này
Sức mạnh của biểu thức chính quy đến từ khả năng bao gồm các lựa chọn thay thế và lặp lại trong mẫu. Chúng được mã hóa trong mẫu bằng cách sử dụng các ký tự đặc biệt, không đại diện cho chính chúng mà thay vào đó được diễn giải theo một cách đặc biệt nào đó
Ký tự
sed -i 's/hello/world/' file.txt154 [dấu mũ] trong biểu thức chính quy khớp với đầu dòng. Ký tự
sed -i 's/hello/world/' file.txt689 [dấu chấm] khớp với bất kỳ ký tự đơn nào. Lệnh
sed -i 's/hello/world/' file.txt22 sau khớp và in các dòng bắt đầu bằng chữ 'b', theo sau là bất kỳ ký tự đơn nào, tiếp theo là chữ 'd'
sed -i 's/hello/world/' file.txt61
Các phần sau giải thích ý nghĩa và cách sử dụng các ký tự đặc biệt trong biểu thức chính quy
5. 2 Biểu thức chính quy cơ bản [BRE] và mở rộng [ERE]
Biểu thức chính quy cơ bản và mở rộng là hai biến thể về cú pháp của mẫu đã chỉ định. Cú pháp Biểu thức chính quy cơ bản [BRE] là mặc định trong
sed -i 's/hello/world/' file.txt22 [và tương tự như vậy trong
sed -i 's/hello/world/' file.txt687]. Sử dụng tùy chọn -E do POSIX chỉ định [-r, --regexp-extended] để bật cú pháp Biểu thức chính quy mở rộng [ERE]
Trong GNU
sed -i 's/hello/world/' file.txt22, sự khác biệt duy nhất giữa biểu thức chính quy cơ bản và mở rộng là ở hành vi của một vài ký tự đặc biệt. ‘?’, ‘+’, dấu ngoặc đơn, dấu ngoặc nhọn [‘{}’] và ‘. ’
Với cú pháp cơ bản [BRE], các ký tự này không có ý nghĩa đặc biệt trừ khi được đặt trước bằng dấu gạch chéo ngược ['\']; . các ký tự này là đặc biệt trừ khi chúng có tiền tố là dấu gạch chéo ngược ['\']
Mẫu mong muốn Cơ bản [BRE] Cú phápMở rộng [ERE] Cú phápChữ ‘+’ [dấu cộng]sed -i 's/hello/world/' file.txt62
sed -i 's/hello/world/' file.txt63Một hoặc nhiều ký tự 'a' theo sau là 'b' [dấu cộng là siêu ký tự đặc biệt]
sed -i 's/hello/world/' file.txt64
sed -i 's/hello/world/' file.txt65
5. 3 Tổng quan về cú pháp biểu thức chính quy cơ bản
Đây là một mô tả ngắn gọn về cú pháp biểu thức chính quy như được sử dụng trong
sed -i 's/hello/world/' file.txt22
sed -i 's/hello/world/' file.txt695
Một ký tự thông thường duy nhất khớp với chính nó
sed -i 's/hello/world/' file.txt60
Matches a sequence of zero or more instances of matches for the preceding regular expression, which must be an ordinary character, a special character preceded by
sed -i 's/hello/world/' file.txt997, a
sed -i 's/hello/world/' file.txt689, a grouped regexp [see below], or a bracket expression. Là một phần mở rộng của GNU, một biểu thức chính quy có hậu tố cũng có thể được theo sau bởi
sed -i 's/hello/world/' file.txt60; . VỊ TRÍ 1003. 1-2001 nói rằng
sed -i 's/hello/world/' file.txt60 là viết tắt của chính nó khi nó xuất hiện ở đầu biểu thức chính quy hoặc biểu thức con, nhưng nhiều triển khai nonGNU không hỗ trợ điều này và thay vào đó, các tập lệnh di động nên sử dụng
sed -i 's/hello/world/' file.txt903 trong các ngữ cảnh này
sed -i 's/hello/world/' file.txt689
Khớp với bất kỳ ký tự nào, bao gồm cả dòng mới
sed -i 's/hello/world/' file.txt154
So khớp với chuỗi null ở đầu không gian mẫu, i. e. những gì xuất hiện sau dấu mũ phải xuất hiện ở đầu không gian mẫu
Trong hầu hết các tập lệnh, không gian mẫu được khởi tạo cho nội dung của mỗi dòng [xem Cách thức hoạt động của
sed -i 's/hello/world/' file.txt22]. Vì vậy, sẽ là một cách đơn giản hóa hữu ích khi coi
sed -i 's/hello/world/' file.txt907 chỉ khớp với các dòng trong đó '#include' là điều đầu tiên trên dòng—ví dụ: nếu có khoảng trắng trước đó thì khớp không thành công. Sự đơn giản hóa này có hiệu lực miễn là nội dung ban đầu của không gian mẫu không bị sửa đổi, ví dụ như với lệnh
sed -i 's/hello/world/' file.txt967
sed -i 's/hello/world/' file.txt154 chỉ hoạt động như một ký tự đặc biệt ở đầu biểu thức chính quy hoặc biểu thức con [nghĩa là sau
sed -i 's/hello/world/' file.txt991 hoặc
sed -i 's/hello/world/' file.txt911]. Tuy nhiên, các tập lệnh di động nên tránh
sed -i 's/hello/world/' file.txt154 ở đầu biểu thức con, vì POSIX cho phép triển khai coi
sed -i 's/hello/world/' file.txt154 là một ký tự thông thường trong ngữ cảnh đó
sed -i 's/hello/world/' file.txt87
Nó giống như
sed -i 's/hello/world/' file.txt154, nhưng đề cập đến phần cuối của không gian mẫu.
sed -i 's/hello/world/' file.txt87 cũng chỉ hoạt động như một ký tự đặc biệt ở cuối biểu thức chính quy hoặc biểu thức con [nghĩa là trước
sed -i 's/hello/world/' file.txt992 hoặc
sed -i 's/hello/world/' file.txt911] và việc sử dụng nó ở cuối biểu thức con là không khả dụng
sed -i 's/hello/world/' file.txt919
sed -i 's/hello/world/' file.txt920
Khớp với bất kỳ ký tự đơn nào trong danh sách. ví dụ:
sed -i 's/hello/world/' file.txt921 khớp với tất cả các nguyên âm. Một danh sách có thể bao gồm các chuỗi như
sed -i 's/hello/world/' file.txt922, khớp với bất kỳ ký tự nào giữa [bao gồm] char1 và char2. Xem Các lớp ký tự và Biểu thức khung
sed -i 's/hello/world/' file.txt923
Là
sed -i 's/hello/world/' file.txt60, nhưng khớp với một hoặc nhiều. Nó là một phần mở rộng của GNU
sed -i 's/hello/world/' file.txt925
As
sed -i 's/hello/world/' file.txt60, but only matches zero or one. Nó là một phần mở rộng của GNU
sed -i 's/hello/world/' file.txt927
Là
sed -i 's/hello/world/' file.txt60, nhưng khớp chính xác với i chuỗi [i là số nguyên thập phân; để dễ mang theo, hãy giữ nó trong khoảng từ 0 đến 255]
sed -i 's/hello/world/' file.txt929
Các trận đấu giữa i và j, bao gồm, trình tự
sed -i 's/hello/world/' file.txt930
So khớp nhiều hơn hoặc bằng i chuỗi
sed -i 's/hello/world/' file.txt931
Nhóm toàn bộ biểu thức chính quy bên trong, điều này được sử dụng để
- Áp dụng các toán tử hậu tố, như
sed -i 's/hello/world/' file.txt
932. this will search for zero or more whole sequences of ‘abcd’, whilesed -i 's/hello/world/' file.txt
933 would search for ‘abc’ followed by zero or more occurrences of ‘d’. Lưu ý rằng POSIX 1003 yêu cầu hỗ trợ chosed -i 's/hello/world/' file.txt
932. 1-2001, nhưng nhiều triển khai không phải GNU không hỗ trợ nó và do đó nó không thể di động phổ biến - Sử dụng tài liệu tham khảo trở lại [xem bên dưới]
sed -i 's/hello/world/' file.txt935
Khớp với regexp1 hoặc regexp2. Sử dụng dấu ngoặc đơn để sử dụng các biểu thức chính quy thay thế phức tạp. Quá trình so khớp lần lượt thử từng phương án, từ trái sang phải và phương án đầu tiên thành công được sử dụng. Nó là một phần mở rộng của GNU
sed -i 's/hello/world/' file.txt936
So khớp nối của regexp1 và regexp2. Phép nối liên kết chặt chẽ hơn
sed -i 's/hello/world/' file.txt911,
sed -i 's/hello/world/' file.txt154 và
sed -i 's/hello/world/' file.txt87, nhưng kém chặt chẽ hơn so với các toán tử biểu thức chính quy khác
sed -i 's/hello/world/' file.txt940
So khớp với biểu thức con được đặt trong ngoặc đơn thứ _________thứ ____ trong biểu thức chính quy. Điều này được gọi là một tài liệu tham khảo trở lại. Các biểu thức con được đánh số hoàn toàn bằng cách đếm số lần xuất hiện của
sed -i 's/hello/world/' file.txt991 từ trái sang phải
sed -i 's/hello/world/' file.txt990
Khớp với ký tự xuống dòng
sed -i 's/hello/world/' file.txt944
So khớp char, trong đó char là một trong số ________ 087, ________ 060, ________ 3689, ________ 4948,
sed -i 's/hello/world/' file.txt997 hoặc
sed -i 's/hello/world/' file.txt154. Lưu ý rằng các chuỗi dấu gạch chéo ngược giống như chữ C duy nhất mà bạn có thể cho là được diễn giải là
sed -i 's/hello/world/' file.txt990 và
sed -i 's/hello/world/' file.txt195;
Lưu ý rằng trình so khớp cụm từ thông dụng là tham lam, tôi. e. , các trận đấu được thử từ trái sang phải và, nếu có thể có hai hoặc nhiều trận đấu bắt đầu từ cùng một ký tự, nó sẽ chọn trận đấu dài nhất
ví dụ
'abcdef'Phù hợp với 'abcdef'
'a*b'Khớp không hoặc nhiều chữ 'a' theo sau bởi một chữ 'b'. Ví dụ: 'b' hoặc 'aaaaab'
'a\?b'Khớp 'b' hoặc 'ab'
'a\+b\+'So khớp một hoặc nhiều chữ 'a' theo sau bởi một hoặc nhiều chữ 'b'. 'ab' là từ khớp ngắn nhất có thể, nhưng các ví dụ khác là 'aaaab' hoặc 'abbbbb' hoặc 'aaaaaabbbbbbbb'
‘. *''. \+’Cả hai đều khớp với tất cả các ký tự trong một chuỗi;
'^ chính. *[. *]’Điều này khớp với một chuỗi bắt đầu bằng 'main', theo sau là dấu ngoặc đơn mở và đóng. 'n', '[' và ']' không cần phải liền kề
'^#'Điều này khớp với một chuỗi bắt đầu bằng '#'
‘\\$’Điều này khớp với một chuỗi kết thúc bằng một dấu gạch chéo ngược. Biểu thức chính quy chứa hai dấu gạch chéo ngược để thoát
‘\$’Thay vào đó, điều này phù hợp với một chuỗi bao gồm một ký hiệu đô la, bởi vì nó được thoát
‘[a-zA-Z0-9]’Trong ngôn ngữ C, điều này khớp với bất kỳ chữ cái hoặc chữ số ASCII nào
‘[^ TAB]\+’[Ở đây TAB là viết tắt của một ký tự tab đơn. ] Điều này khớp với một chuỗi gồm một hoặc nhiều ký tự, không có ký tự nào là khoảng trắng hoặc tab. Thông thường điều này có nghĩa là một từ
‘^\[. *\]\n\1$’Điều này khớp với một chuỗi bao gồm hai chuỗi con bằng nhau được phân tách bằng một dòng mới
‘. \{9\}A$’Điều này khớp với chín ký tự theo sau là chữ 'A' ở cuối dòng
‘^. \{15\}A’Điều này khớp với phần đầu của một chuỗi chứa 16 ký tự, ký tự cuối cùng là 'A'
5. 4 Tổng quan về cú pháp biểu thức chính quy mở rộng
Sự khác biệt duy nhất giữa biểu thức chính quy cơ bản và mở rộng là trong hành vi của một vài ký tự. ‘?’, ‘+’, dấu ngoặc đơn, dấu ngoặc nhọn [‘{}’] và ‘. ’. Mặc dù các biểu thức chính quy cơ bản yêu cầu chúng phải được thoát nếu bạn muốn chúng hoạt động như các ký tự đặc biệt, nhưng khi sử dụng các biểu thức chính quy mở rộng, bạn phải thoát chúng nếu bạn muốn chúng khớp với một ký tự chữ. ‘. ’ is special here because ‘\. ’ is a GNU extension – standard basic regular expressions do not provide its functionality
ví dụ
sed -i 's/hello/world/' file.txt955
trở thành 'abc\?' khi sử dụng các biểu thức chính quy mở rộng. Nó khớp với chuỗi ký tự 'abc?'
sed -i 's/hello/world/' file.txt956
trở thành 'c+' khi sử dụng các biểu thức chính quy mở rộng. It matches one or more ‘c’s
sed -i 's/hello/world/' file.txt957
trở thành 'a{3,}' khi sử dụng các biểu thức chính quy mở rộng. Nó phù hợp với ba hoặc nhiều chữ 'a'
sed -i 's/hello/world/' file.txt958
trở thành '[abc]{2,3}' khi sử dụng các biểu thức chính quy mở rộng. Nó khớp với 'abcabc' hoặc 'abcabcabc'
sed -i 's/hello/world/' file.txt959
trở thành '[abc*]\1' khi sử dụng các biểu thức chính quy mở rộng. Backreferences vẫn phải được thoát khi sử dụng biểu thức chính quy mở rộng
sed -i 's/hello/world/' file.txt960
becomes ‘a. b’ khi sử dụng các biểu thức chính quy mở rộng. Nó khớp với 'a' hoặc 'b'
5. 5 lớp ký tự và biểu thức khung
Biểu thức ngoặc là một danh sách các ký tự được bao quanh bởi '[' và ']'. Nó khớp với bất kỳ ký tự đơn nào trong danh sách đó; . Ví dụ: lệnh sau thay thế các từ 'grey' hoặc 'grey' bằng 'blue'
Biểu thức ngoặc có thể được sử dụng trong cả biểu thức chính quy cơ bản và mở rộng [nghĩa là có hoặc không có tùy chọn -E/-r]
Trong một biểu thức ngoặc, một biểu thức phạm vi bao gồm hai ký tự được phân tách bằng dấu gạch nối. Nó khớp với bất kỳ ký tự đơn nào sắp xếp giữa hai ký tự, bao gồm. Trong ngôn ngữ C mặc định, trình tự sắp xếp là thứ tự ký tự gốc;
Cuối cùng, một số lớp ký tự được đặt tên nhất định được xác định trước trong các biểu thức ngoặc, như sau
Các lớp được đặt tên này phải được sử dụng bên trong ngoặc đơn. Correct usage
sed -i 's/hello/world/' file.txt66
Incorrect usage is rejected by newer
sed -i 's/hello/world/' file.txt22 versions. Các phiên bản cũ hơn đã chấp nhận nó nhưng coi nó như một biểu thức ngoặc đơn [tương đương với '[dgit. ]’, nghĩa là chỉ có các ký tự d/g/i/t/. ]
sed -i 's/hello/world/' file.txt67‘[. hàng năm. ]'
Ký tự chữ và số. ‘[. alpha. ]' và '[. chữ số. ]’;
‘[. chữ cái. ]'Ký tự chữ cái. ‘[. thấp hơn. ]' và '[. phía trên. ]’;
‘[. trống. ]'Ký tự trống. không gian và tab
‘[. cntrl. ]’Ký tự điều khiển. In ASCII, these characters have octal codes 000 through 037, and 177 [DEL]. Trong các bộ ký tự khác, đây là các ký tự tương đương, nếu có
‘[. chữ số. ]'chữ số.
sed -i 's/hello/world/' file.txt962‘[. đồ thị. ]’
ký tự đồ họa. ‘[. hàng năm. ]' và '[. chấm câu. ]’
‘[. thấp hơn. ]'Lower-case letters; in the ‘C’ locale and ASCII character encoding, this is
sed -i 's/hello/world/' file.txt963‘[. in. ]'
Printable characters. ‘[. hàng năm. ]’, ‘[. punct. ]', và dấu cách
‘[. chấm câu. ]'Ký tự dấu câu;
‘[. không gian. ]'Ký tự khoảng trắng. in the ‘C’ locale, this is tab, newline, vertical tab, form feed, carriage return, and space
‘[. upper. ]'Chữ in hoa. trong ngôn ngữ 'C' và mã hóa ký tự ASCII, đây là
sed -i 's/hello/world/' file.txt965‘[. x chữ số. ]'
chữ số thập lục phân.
sed -i 's/hello/world/' file.txt966
Lưu ý rằng dấu ngoặc trong các tên lớp này là một phần của tên tượng trưng và phải được bao gồm cùng với dấu ngoặc phân định biểu thức dấu ngoặc
Hầu hết các ký tự meta mất ý nghĩa đặc biệt của chúng bên trong các biểu thức ngoặc
‘]’ends the bracket expression if it’s not the first list item. Vì vậy, nếu bạn muốn đặt ký tự ‘]’ thành một mục trong danh sách, bạn phải đặt ký tự này trước
'-'đại diện cho phạm vi nếu nó không phải là đầu tiên hoặc cuối cùng trong danh sách hoặc điểm kết thúc của một phạm vi
'^'đại diện cho các ký tự không có trong danh sách. Nếu bạn muốn biến ký tự '^' thành một mục trong danh sách, hãy đặt ký tự đó ở bất kỳ đâu nhưng trước tiên
LÀM. kết hợp đoạn này [sao chép nguyên văn từ phần BRE]
The characters
sed -i 's/hello/world/' file.txt87,
sed -i 's/hello/world/' file.txt60,
sed -i 's/hello/world/' file.txt689,
sed -i 's/hello/world/' file.txt948, and
sed -i 's/hello/world/' file.txt997 are normally not special within list. Ví dụ:
sed -i 's/hello/world/' file.txt972 khớp với ‘\’ hoặc ‘*’, vì
sed -i 's/hello/world/' file.txt997 không có gì đặc biệt ở đây. Tuy nhiên, các chuỗi như
sed -i 's/hello/world/' file.txt974,
sed -i 's/hello/world/' file.txt975 và
sed -i 's/hello/world/' file.txt976 là đặc biệt trong danh sách và đại diện cho các ký hiệu đối chiếu, lớp tương đương và lớp ký tự tương ứng, và do đó,
sed -i 's/hello/world/' file.txt948 là đặc biệt trong danh sách khi nó được theo sau bởi
sed -i 's/hello/world/' file.txt689,
sed -i 's/hello/world/' file.txt980 hoặc
sed -i 's/hello/world/' file.txt383. Also, when not in
sed -i 's/hello/world/' file.txt72 mode, special escapes like
sed -i 's/hello/world/' file.txt990 and
sed -i 's/hello/world/' file.txt953 are recognized within list. Xem Thoát‘[. ’
represents the open collating symbol
‘. ]'represents the close collating symbol
'[='đại diện cho lớp tương đương mở
'=]'đại diện cho lớp tương đương gần
‘[. ’represents the open character class symbol, and should be followed by a valid character class name
‘. ]'đại diện cho ký hiệu lớp ký tự gần
5. 6 phần mở rộng biểu thức chính quy
Các chuỗi sau đây có ý nghĩa đặc biệt bên trong các biểu thức chính quy [được sử dụng trong địa chỉ và lệnh
sed -i 's/hello/world/' file.txt967]
These can be used in both basic and extended regular expressions [that is, with or without the -E/-r options]
sed -i 's/hello/world/' file.txt985
Khớp với bất kỳ ký tự "từ" nào. Ký tự “từ” là bất kỳ chữ cái hoặc chữ số hoặc ký tự gạch dưới
sed -i 's/hello/world/' file.txt68
sed -i 's/hello/world/' file.txt986
Khớp với bất kỳ ký tự "không phải từ" nào
sed -i 's/hello/world/' file.txt69
sed -i 's/hello/world/' file.txt987
Khớp với một ranh giới từ;
sed -i 's/hello/world/' file.txt90
sed -i 's/hello/world/' file.txt988
Khớp ở mọi nơi nhưng trên một ranh giới từ;
sed -i 's/hello/world/' file.txt91
sed -i 's/hello/world/' file.txt989
So khớp các ký tự khoảng trắng [dấu cách và tab]. Newlines embedded in the pattern/hold spaces will also match
sed -i 's/hello/world/' file.txt92
sed -i 's/hello/world/' file.txt990
Matches non-whitespace characters
sed -i 's/hello/world/' file.txt93
sed -i 's/hello/world/' file.txt991
Matches the beginning of a word
sed -i 's/hello/world/' file.txt94
sed -i 's/hello/world/' file.txt992
Khớp với phần cuối của một từ
sed -i 's/hello/world/' file.txt95
sed -i 's/hello/world/' file.txt156
Chỉ khớp khi bắt đầu không gian mẫu. Điều này khác với
sed -i 's/hello/world/' file.txt154 ở chế độ nhiều dòng
Compare the following two examples
sed -i 's/hello/world/' file.txt96
sed -i 's/hello/world/' file.txt157
Matches only at the end of pattern space. Điều này khác với
sed -i 's/hello/world/' file.txt87 ở chế độ nhiều dòng
5. 7 Tham chiếu ngược và Biểu thức con
back-references are regular expression commands which refer to a previous part of the matched regular expression. Tham chiếu ngược được chỉ định bằng dấu gạch chéo ngược và một chữ số [e. g. ‘\1’]. The part of the regular expression they refer to is called a subexpression, and is designated with parentheses
Tham chiếu ngược và biểu thức con được sử dụng trong hai trường hợp. trong mẫu tìm kiếm biểu thức chính quy và trong phần thay thế của lệnh
sed -i 's/hello/world/' file.txt967 [xem Địa chỉ biểu thức chính quy và Lệnh "s"]
In a regular expression pattern, back-references are used to match the same content as a previously matched subexpression. In the following example, the subexpression is ‘. ’ - bất kỳ ký tự đơn nào [được bao quanh bởi dấu ngoặc đơn khiến nó trở thành biểu thức con]. Tham chiếu ngược '\ 1' yêu cầu khớp cùng nội dung [cùng ký tự] với biểu thức con
Lệnh bên dưới khớp với các từ bắt đầu bằng bất kỳ ký tự nào, theo sau là chữ 'o', theo sau là ký tự giống như ký tự đầu tiên
sed -i 's/hello/world/' file.txt97
Multiple subexpressions are automatically numbered from left-to-right. Lệnh này tìm kiếm các bảng đối xứng gồm 6 chữ cái [ba chữ cái đầu tiên là 3 biểu thức con, tiếp theo là 3 tham chiếu ngược theo thứ tự ngược lại]
sed -i 's/hello/world/' file.txt98
Trong lệnh
sed -i 's/hello/world/' file.txt967, các tham chiếu ngược có thể được sử dụng trong phần thay thế để tham chiếu lại các biểu thức con trong phần biểu thức chính quy
Ví dụ sau sử dụng hai biểu thức con trong biểu thức chính quy để khớp với hai từ được phân tách bằng dấu cách. The back-references in the replacement part prints the words in a different order
sed -i 's/hello/world/' file.txt99
Khi được sử dụng xen kẽ, nếu nhóm không tham gia trận đấu thì tham chiếu ngược khiến toàn bộ trận đấu thất bại. Ví dụ: 'a [. ]. b\1' sẽ không khớp với 'ba'. Khi nhiều biểu thức chính quy được đưa ra với -e hoặc từ một tệp [tệp '-f'], các tham chiếu ngược là cục bộ cho từng biểu thức
5. 8 Escape Sequences - chỉ định các ký tự đặc biệt
Cho đến chương này, chúng ta mới chỉ gặp các lối thoát có dạng '\^', lệnh này yêu cầu
sed -i 's/hello/world/' file.txt22 không hiểu dấu mũ là một ký tự đặc biệt, mà nên hiểu nó theo nghĩa đen. For example, ‘\*’ matches a single asterisk rather than zero or more backslashes
This chapter introduces another kind of escape6—that is, escapes that are applied to a character or sequence of characters that ordinarily are taken literally, and that
sed -i 's/hello/world/' file.txt22 replaces with a special character. Điều này cung cấp một cách mã hóa các ký tự không in được trong các mẫu theo cách hiển thị. There is no restriction on the appearance of non-printing characters in a
sed -i 's/hello/world/' file.txt22 script but when a script is being prepared in the shell or by text editing, it is usually easier to use one of the following escape sequences than the binary character it represents
Danh sách những lần trốn thoát này là
sed 's/hello/world/' input.txt > output.txt902
Tạo hoặc khớp một ký tự BEL, đó là một "cảnh báo" [ASCII 7]
sed 's/hello/world/' input.txt > output.txt903
Tạo hoặc khớp với nguồn cấp dữ liệu biểu mẫu [ASCII 12]
sed -i 's/hello/world/' file.txt990
Tạo hoặc khớp một dòng mới [ASCII 10]
sed 's/hello/world/' input.txt > output.txt905
Tạo hoặc khớp với trả lại vận chuyển [ASCII 13]
sed -i 's/hello/world/' file.txt953
Tạo hoặc khớp với tab ngang [ASCII 9]
sed 's/hello/world/' input.txt > output.txt907
Tạo hoặc khớp với cái gọi là “tab dọc” [ASCII 11]
sed 's/hello/world/' input.txt > output.txt908
Tạo hoặc khớp với CONTROL-x, trong đó x là ký tự bất kỳ. The precise effect of ‘\cx’ is as follows. nếu x là chữ thường, nó được chuyển thành chữ hoa. Sau đó, bit 6 của ký tự [hex 40] được đảo ngược. Do đó, '\cz' trở thành hex 1A, nhưng '\c{' trở thành hex 3B, trong khi '\c;' trở thành hex 7B
sed 's/hello/world/' input.txt > output.txt909
Tạo hoặc khớp một ký tự có giá trị ASCII thập phân là xxx
sed 's/hello/world/' input.txt > output.txt910
Tạo hoặc khớp một ký tự có giá trị ASCII bát phân là xxx
sed 's/hello/world/' input.txt > output.txt911
Produces or matches a character whose hexadecimal ASCII value is xx
'\b' [xóa lùi] đã bị bỏ qua do xung đột với nghĩa "ranh giới từ" hiện có
5. 8. 1 ưu tiên thoát
GNU
sed -i 's/hello/world/' file.txt22 xử lý các chuỗi thoát trước khi chuyển văn bản vào đối sánh biểu thức chính quy của lệnh
sed -i 's/hello/world/' file.txt666 và đối sánh Địa chỉ. Do đó, hai lệnh sau đây là tương đương ['0x5e' là giá trị ASCII thập lục phân của ký tự '^']
sed 's/hello/world/' input.txt > output.txt90
As are the following [‘0x5b’,‘0x5d’ are the hexadecimal ASCII values of ‘[’,‘]’, respectively]
sed 's/hello/world/' input.txt > output.txt91
Tuy nhiên, nên tránh các ký tự đặc biệt như vậy do các trường hợp cạnh không mong muốn. For example, the following are not equivalent
sed 's/hello/world/' input.txt > output.txt92
5. 9 ký tự Multibyte và cân nhắc ngôn ngữ
GNU
sed -i 's/hello/world/' file.txt22 xử lý các ký tự nhiều byte hợp lệ trong các ngôn ngữ nhiều byte [e. g.
sed 's/hello/world/' input.txt > output.txt915]. 7
Ví dụ sau sử dụng chữ cái Hy Lạp Capital Sigma [Σ, điểm mã Unicode
sed 's/hello/world/' input.txt > output.txt916]. Trong ngôn ngữ
sed 's/hello/world/' input.txt > output.txt915,
sed -i 's/hello/world/' file.txt22 xử lý chính xác Sigma dưới dạng một ký tự mặc dù nó là 2 octet [byte]
sed 's/hello/world/' input.txt > output.txt93
Để buộc
sed -i 's/hello/world/' file.txt22 xử lý các octet riêng biệt, hãy sử dụng ngôn ngữ
sed 's/hello/world/' input.txt > output.txt920 [còn được gọi là ngôn ngữ
sed 's/hello/world/' input.txt > output.txt921]
sed 's/hello/world/' input.txt > output.txt94
5. 9. 1 Ký tự nhiều byte không hợp lệ
Các biểu thức chính quy của
sed -i 's/hello/world/' file.txt22 không khớp với các chuỗi nhiều byte không hợp lệ trong một ngôn ngữ nhiều byte
Trong các ví dụ sau, giá trị ascii
sed 's/hello/world/' input.txt > output.txt923 là một ký tự nhiều byte không hoàn chỉnh [được hiển thị ở đây là �]. The regular expression ‘. ’ does not match it
sed 's/hello/world/' input.txt > output.txt95
Tương tự, biểu thức chính quy 'bắt tất cả' '. *’ không khớp với toàn bộ dòng
sed 's/hello/world/' input.txt > output.txt96
GNU
sed -i 's/hello/world/' file.txt22 offers the special
sed -i 's/hello/world/' file.txt977 command to clear the current pattern space regardless of invalid multibyte characters [i. e. it works like
sed 's/hello/world/' input.txt > output.txt926 but also removes invalid multibyte characters]
sed 's/hello/world/' input.txt > output.txt97
Alternatively, force the
sed 's/hello/world/' input.txt > output.txt920 locale to process each octet separately [every octet is a valid character in the
sed 's/hello/world/' input.txt > output.txt920 locale]
sed 's/hello/world/' input.txt > output.txt98
sed -i 's/hello/world/' file.txt22’s inability to process invalid multibyte characters can be used to detect such invalid sequences in a file. Trong các ví dụ sau,
sed 's/hello/world/' input.txt > output.txt930 là một chuỗi nhiều byte không hợp lệ, trong khi
sed 's/hello/world/' input.txt > output.txt931 là một chuỗi nhiều byte hợp lệ [của ký tự Sigma trong tiếng Hy Lạp]
Chương trình
sed -i 's/hello/world/' file.txt22 sau đây xóa tất cả các ký tự hợp lệ bằng cách sử dụng
sed 's/hello/world/' input.txt > output.txt933. Bất kỳ nội dung nào còn lại trong không gian mẫu [các ký tự không hợp lệ] đều được thêm vào không gian giữ bằng lệnh
sed -i 's/hello/world/' file.txt947. Ở dòng cuối cùng [
sed -i 's/hello/world/' file.txt87], khoảng trống được lấy ra [
sed -i 's/hello/world/' file.txt975], các dòng mới bị xóa [
sed 's/hello/world/' input.txt > output.txt937] và mọi octet còn lại được in rõ ràng [
sed -i 's/hello/world/' file.txt67]. Do đó, bất kỳ chuỗi multibyte không hợp lệ nào được in dưới dạng giá trị bát phân
sed 's/hello/world/' input.txt > output.txt99
Với một vài lệnh nữa,
sed -i 's/hello/world/' file.txt22 có thể in chính xác số dòng tương ứng với từng ký tự không hợp lệ [dòng 3]. Sau đó, các ký tự này có thể bị xóa bằng cách buộc ngôn ngữ
sed 's/hello/world/' input.txt > output.txt920 và sử dụng các chuỗi thoát bát phân
sed -i 's/hello/world/' file.txt040
5. 9. 2 Chuyển đổi chữ hoa/chữ thường
Lệnh thay thế của GNU
sed -i 's/hello/world/' file.txt22 [
sed -i 's/hello/world/' file.txt967] hỗ trợ chuyển đổi chữ hoa/chữ thường sử dụng mã
sed -i 's/hello/world/' file.txt105,
sed -i 's/hello/world/' file.txt104. Những chuyển đổi này hỗ trợ các ký tự nhiều byte
sed -i 's/hello/world/' file.txt041
Xem Lệnh "s"
5. 9. 3 lớp ký tự biểu thức chính quy nhiều byte
Ở các ngôn ngữ khác, trình tự sắp xếp không được chỉ định và '[a-d]' có thể tương đương với '[abcd]' hoặc '[aBbCcDd]' hoặc có thể không khớp với bất kỳ ký tự nào hoặc bộ ký tự mà nó . Để có được cách diễn giải truyền thống của biểu thức ngoặc, bạn có thể sử dụng ngôn ngữ 'C' bằng cách đặt biến môi trường
sed 's/hello/world/' input.txt > output.txt945 thành giá trị 'C'
sed -i 's/hello/world/' file.txt042
Giải thích của họ phụ thuộc vào ngôn ngữ
sed 's/hello/world/' input.txt > output.txt946; . hàng năm. ]]’ có nghĩa là lớp ký tự gồm số và chữ cái trong ngôn ngữ hiện tại
LÀM. hiển thị ví dụ về đối chiếu
sed -i 's/hello/world/' file.txt043
6 nâng cao sed -i 's/hello/world/' file.txt
22. chu kỳ và bộ đệm
6. 1 Cách thức hoạt động của sed -i 's/hello/world/' file.txt
22
sed -i 's/hello/world/' file.txt22 duy trì hai bộ đệm dữ liệu. không gian mẫu đang hoạt động và không gian giữ phụ. Ban đầu cả hai đều rỗng
sed -i 's/hello/world/' file.txt22 hoạt động bằng cách thực hiện chu trình sau trên mỗi dòng đầu vào. đầu tiên,
sed -i 's/hello/world/' file.txt22 đọc một dòng từ luồng đầu vào, xóa mọi dòng mới ở cuối và đặt nó vào không gian mẫu. Sau đó, các lệnh được thực thi; . địa chỉ là một loại mã điều kiện và một lệnh chỉ được thực thi nếu điều kiện được xác minh trước khi lệnh được thực thi
Khi đến cuối tập lệnh, trừ khi tùy chọn -n được sử dụng, nội dung của không gian mẫu được in ra luồng đầu ra, thêm lại dòng mới ở cuối nếu nó bị xóa. 8 Sau đó, chu kỳ tiếp theo bắt đầu cho dòng đầu vào tiếp theo
Trừ khi các lệnh đặc biệt [như 'D'] được sử dụng, không gian mẫu sẽ bị xóa giữa hai chu kỳ. Mặt khác, không gian giữ giữ dữ liệu của nó giữa các chu kỳ [xem các lệnh 'h', 'H', 'x', 'g', 'G' để di chuyển dữ liệu giữa cả hai bộ đệm]
6. 2 bộ đệm giữ và mẫu
LÀM
6. 3 Kỹ thuật đa dòng - sử dụng D,G,H,N,P để xử lý nhiều dòng
Nhiều dòng có thể được xử lý như một bộ đệm bằng cách sử dụng
sed -i 's/hello/world/' file.txt939,
sed -i 's/hello/world/' file.txt945,
sed -i 's/hello/world/' file.txt947,
sed -i 's/hello/world/' file.txt71,
sed -i 's/hello/world/' file.txt957. Chúng tương tự như các lệnh viết thường [
sed -i 's/hello/world/' file.txt36,
sed -i 's/hello/world/' file.txt944,
sed -i 's/hello/world/' file.txt946,
sed -i 's/hello/world/' file.txt952,
sed -i 's/hello/world/' file.txt37], ngoại trừ việc các lệnh này nối hoặc trừ dữ liệu trong khi tôn trọng các dòng mới được nhúng - cho phép thêm và xóa các dòng khỏi mẫu và giữ khoảng trắng
Họ hoạt động như sau
sed -i 's/hello/world/' file.txt939
xóa dòng khỏi không gian mẫu cho đến dòng mới đầu tiên và khởi động lại chu kỳ
sed -i 's/hello/world/' file.txt945
nối thêm dòng từ không gian giữ vào không gian mẫu, với một dòng mới trước nó
sed -i 's/hello/world/' file.txt947
nối thêm dòng từ không gian mẫu vào không gian giữ, với một dòng mới trước nó
sed -i 's/hello/world/' file.txt71
appends line from the input file to the pattern space
sed -i 's/hello/world/' file.txt957
in dòng từ không gian mẫu cho đến dòng mới đầu tiên
Ví dụ sau minh họa hoạt động của lệnh
sed -i 's/hello/world/' file.txt71 và
sed -i 's/hello/world/' file.txt939
sed -i 's/hello/world/' file.txt044
sed -i 's/hello/world/' file.txt
22 bắt đầu bằng cách đọc dòng đầu tiên vào không gian mẫu [i. e. '1']- Vào đầu mỗi chu kỳ, lệnh
sed -i 's/hello/world/' file.txt
71 nối thêm một dòng mới và dòng tiếp theo vào không gian mẫu [i. e. ‘1’, ‘\n’, ‘2’ trong chu kỳ đầu tiên] - Lệnh
sed -i 's/hello/world/' file.txt
67 in rõ ràng nội dung của không gian mẫu - Sau đó, lệnh
sed -i 's/hello/world/' file.txt
939 sẽ xóa nội dung của không gian mẫu cho đến dòng mới đầu tiên [để lại '2' ở cuối chu kỳ đầu tiên] - Ở chu kỳ tiếp theo, lệnh
sed -i 's/hello/world/' file.txt
71 nối thêm một dòng mới và dòng đầu vào tiếp theo vào không gian mẫu [e. g. ‘2’, ‘\n’, ‘3’]
Một kỹ thuật phổ biến để xử lý các khối văn bản như đoạn văn [thay vì từng dòng] là sử dụng cấu trúc sau
sed -i 's/hello/world/' file.txt045
- Biểu thức đầu tiên,
sed 's/hello/world/' input.txt > output.txt
974 hoạt động trên tất cả các dòng không trống và thêm dòng hiện tại [trong không gian mẫu] vào không gian giữ. Trên tất cả các dòng ngoại trừ dòng cuối cùng, không gian mẫu bị xóa và chu kỳ được bắt đầu lại - Các biểu thức khác
sed -i 's/hello/world/' file.txt
975 vàsed -i 's/hello/world/' file.txt
967 chỉ được thực hiện trên các dòng trống [i. e. ngăn cách đoạn văn]. Lệnhsed -i 's/hello/world/' file.txt
975 tìm nạp các dòng tích lũy từ không gian giữ trở lại không gian mẫu. Sau đó, lệnhsed -i 's/hello/world/' file.txt
666 sẽ hoạt động trên tất cả văn bản trong đoạn văn [bao gồm cả các dòng mới được nhúng]
Ví dụ sau minh họa kỹ thuật này
sed -i 's/hello/world/' file.txt046
Để biết thêm ví dụ về chú thích, hãy xem Tìm kiếm văn bản trên nhiều dòng và Điều chỉnh độ dài dòng
6. 4 Phân nhánh và Kiểm soát luồng
Các lệnh rẽ nhánh
sed -i 's/hello/world/' file.txt982,
sed -i 's/hello/world/' file.txt983 và
sed -i 's/hello/world/' file.txt984 cho phép thay đổi luồng chương trình
sed -i 's/hello/world/' file.txt22
Theo mặc định,
sed -i 's/hello/world/' file.txt22 đọc một dòng đầu vào vào bộ đệm mẫu, sau đó tiếp tục xử lý tất cả các lệnh theo thứ tự. Các lệnh không có địa chỉ ảnh hưởng đến tất cả các dòng. Các lệnh có địa chỉ chỉ ảnh hưởng đến các dòng phù hợp. Xem tổng quan về Chu kỳ thực thi và địa chỉ
sed -i 's/hello/world/' file.txt22 does not support a typical
sed 's/hello/world/' input.txt > output.txt985 construct. Instead, some commands can be used as conditionals or to change the default flow control
sed -i 's/hello/world/' file.txt36
xóa [xóa] không gian mẫu hiện tại và khởi động lại chu kỳ chương trình mà không xử lý phần còn lại của lệnh và không in không gian mẫu
sed -i 's/hello/world/' file.txt939
xóa nội dung của không gian mẫu cho đến dòng mới đầu tiên và khởi động lại chu kỳ chương trình mà không xử lý phần còn lại của lệnh và không in không gian mẫu
sed 's/hello/world/' input.txt > output.txt988
sed 's/hello/world/' input.txt > output.txt989
sed 's/hello/world/' input.txt > output.txt990
sed 's/hello/world/' input.txt > output.txt991
Addresses and regular expressions can be used as an
sed 's/hello/world/' input.txt > output.txt985 conditional. Nếu [addr] khớp với không gian mẫu hiện tại, hãy thực hiện [các] lệnh. Ví dụ. Lệnh
sed 's/hello/world/' input.txt > output.txt993 có nghĩa là. nếu mẫu hiện tại khớp với biểu thức chính quy
sed 's/hello/world/' input.txt > output.txt994 [dòng bắt đầu bằng hàm băm], thì hãy thực hiện lệnh
sed -i 's/hello/world/' file.txt36. xóa dòng mà không in và khởi động lại chu kỳ chương trình ngay lập tức
sed -i 's/hello/world/' file.txt982
nhánh vô điều kiện [nghĩa là. always jump to a label, skipping or repeating other commands, without restarting a new cycle]. Kết hợp với một địa chỉ, nhánh có thể được thực hiện có điều kiện trên các dòng phù hợp
sed -i 's/hello/world/' file.txt983
branch conditionally [that is. jump to a label] only if a
sed -i 's/hello/world/' file.txt666 command has succeeded since the last input line was read or another conditional branch was taken
sed -i 's/hello/world/' file.txt984
tương tự nhưng ngược lại với lệnh
sed -i 's/hello/world/' file.txt983. chỉ rẽ nhánh nếu không có sự thay thế thành công nào kể từ khi dòng đầu vào cuối cùng được đọc
Hai chương trình
sed -i 's/hello/world/' file.txt22 sau đây là tương đương. The first [contrived] example uses the
sed -i 's/hello/world/' file.txt982 command to skip the
sed -i 's/hello/world/' file.txt666 command on lines containing ‘1’. Ví dụ thứ hai sử dụng một địa chỉ phủ định [‘. ’] để chỉ thực hiện thay thế trên các dòng mong muốn. The
sed -i 's/hello/world/' file.txt0404 command is still executed on all lines
sed -i 's/hello/world/' file.txt047
6. 4. 1 Phân nhánh và Chu kỳ
Các lệnh
sed -i 's/hello/world/' file.txt982,
sed -i 's/hello/world/' file.txt983 và
sed -i 's/hello/world/' file.txt984 có thể được theo sau bởi một nhãn [thường là một chữ cái]. Nhãn được xác định bằng dấu hai chấm theo sau bởi một hoặc nhiều chữ cái [e. g. ‘. x’]. If the label is omitted the branch commands restart the cycle. Note the difference between branching to a label and restarting the cycle. when a cycle is restarted,
sed -i 's/hello/world/' file.txt22 first prints the current content of the pattern space, then reads the next input line into the pattern space; Jumping to a label [even if it is at the beginning of the program] does not print the pattern space and does not read the next input line
The following program is a no-op. The
sed -i 's/hello/world/' file.txt982 command [the only command in the program] does not have a label, and thus simply restarts the cycle. On each cycle, the pattern space is printed and the next input line is read
Ví dụ sau đây là một vòng lặp vô hạn - nó không kết thúc và không in bất cứ thứ gì. The
sed -i 's/hello/world/' file.txt982 command jumps to the ‘x’ label, and a new cycle is never started
sed -i 's/hello/world/' file.txt048
Branching is often complemented with the
sed -i 's/hello/world/' file.txt952 or
sed -i 's/hello/world/' file.txt71 commands. both commands read the next input line into the pattern space without waiting for the cycle to restart. Before reading the next input line,
sed -i 's/hello/world/' file.txt952 prints the current pattern space then empties it, while
sed -i 's/hello/world/' file.txt71 appends a newline and the next input line to the pattern space
Consider the following two examples
sed -i 's/hello/world/' file.txt049
- Both examples do not inf-loop, despite never starting a new cycle
- In the first example, the
sed -i 's/hello/world/' file.txt
952 commands first prints the content of the pattern space, empties the pattern space then reads the next input line - In the second example, the
sed -i 's/hello/world/' file.txt
71 commands appends the next input line to the pattern space [with a newline]. Lines are accumulated in the pattern space until there are no more input lines to read, then thesed -i 's/hello/world/' file.txt
71 command terminates thesed -i 's/hello/world/' file.txt
22 program. When the program terminates, the end-of-cycle actions are performed, and the entire pattern space is printed - The second example requires GNU
sed -i 's/hello/world/' file.txt
22, because it uses the non-POSIX-standard behavior ofsed -i 's/hello/world/' file.txt
71. See the “sed -i 's/hello/world/' file.txt
71 command on the last line” paragraph in Reporting Bugs - To further examine the difference between the two examples, try the following commands
sed -i 's/hello/world/' file.txt
000
6. 4. 2 Branching example. joining lines
As a real-world example of using branching, consider the case of quoted-printable files, typically used to encode email messages. In these files long lines are split and marked with a soft line break consisting of a single ‘=’ character at the end of the line
sed -i 's/hello/world/' file.txt001
The following program uses an address match ‘/=$/’ as a conditional. If the current pattern space ends with a ‘=’, it reads the next input line using
sed -i 's/hello/world/' file.txt71, replaces all ‘=’ characters which are followed by a newline, and unconditionally branches [
sed -i 's/hello/world/' file.txt982] to the beginning of the program without restarting a new cycle. If the pattern space does not ends with ‘=’, the default action is performed. the pattern space is printed and a new cycle is started
sed -i 's/hello/world/' file.txt002
Here’s an alternative program with a slightly different approach. On all lines except the last,
sed -i 's/hello/world/' file.txt71 appends the line to the pattern space. A substitution command then removes soft line breaks [‘=’ at the end of a line, i. e. followed by a newline] by replacing them with an empty string. if the substitution was successful [meaning the pattern space contained a line which should be joined], The conditional branch command
sed -i 's/hello/world/' file.txt983 jumps to the beginning of the program without completing or restarting the cycle. If the substitution failed [meaning there were no soft line breaks], The
sed -i 's/hello/world/' file.txt983 command will not branch. Then,
sed -i 's/hello/world/' file.txt957 will print the pattern space content until the first newline, and
sed -i 's/hello/world/' file.txt939 will delete the pattern space content until the first new line. [To learn more about
sed -i 's/hello/world/' file.txt71,
sed -i 's/hello/world/' file.txt957 and
sed -i 's/hello/world/' file.txt939 commands see Multiline techniques]
sed -i 's/hello/world/' file.txt003
For more line-joining examples see Joining lines
7 Some Sample Scripts
Here are some
sed -i 's/hello/world/' file.txt22 scripts to guide you in the art of mastering
sed -i 's/hello/world/' file.txt22
7. 1 Joining lines
This section uses
sed -i 's/hello/world/' file.txt71,
sed -i 's/hello/world/' file.txt939 and
sed -i 's/hello/world/' file.txt957 commands to process multiple lines, and the
sed -i 's/hello/world/' file.txt982 and
sed -i 's/hello/world/' file.txt983 commands for branching. See Multiline techniques and Branching and flow control
Join specific lines [e. g. if lines 2 and 3 need to be joined]
sed -i 's/hello/world/' file.txt004
Join backslash-continued lines
sed -i 's/hello/world/' file.txt005
Join lines that start with whitespace [e. g SMTP headers]
sed -i 's/hello/world/' file.txt006
7. 2 Centering Lines
This script centers all lines of a file on a 80 columns width. To change that width, the number in
sed -i 's/hello/world/' file.txt0439 must be replaced, and the number of added spaces also must be changed
Note how the buffer commands are used to separate parts in the regular expressions to be matched—this is a common technique
sed -i 's/hello/world/' file.txt007
sed -i 's/hello/world/' file.txt008
sed -i 's/hello/world/' file.txt009
sed -i 's/hello/world/' file.txt010
sed -i 's/hello/world/' file.txt011
sed -i 's/hello/world/' file.txt012
7. 3 Tăng một số
This script is one of a few that demonstrate how to do arithmetic in
sed -i 's/hello/world/' file.txt22. This is indeed possible,9 but must be done manually
To increment one number you just add 1 to last digit, replacing it by the following digit. There is one exception. when the digit is a nine the previous digits must be also incremented until you don’t have a nine
This solution by Bruno Haible is very clever and smart because it uses a single buffer; if you don’t have this limitation, the algorithm used in Numbering lines, is faster. It works by replacing trailing nines with an underscore, then using multiple
sed -i 's/hello/world/' file.txt967 commands to increment the last digit, and then again substituting underscores with zeros
sed -i 's/hello/world/' file.txt013
sed -i 's/hello/world/' file.txt014
sed -i 's/hello/world/' file.txt015
sed -i 's/hello/world/' file.txt016
sed -i 's/hello/world/' file.txt017
7. 4 Rename Files to Lower Case
This is a pretty strange use of
sed -i 's/hello/world/' file.txt22. We transform text, and transform it to be shell commands, then just feed them to shell. Don’t worry, even worse hacks are done when using
sed -i 's/hello/world/' file.txt22; I have seen a script converting the output of
sed -i 's/hello/world/' file.txt0444 into a
sed -i 's/hello/world/' file.txt0445 program
The main body of this is the
sed -i 's/hello/world/' file.txt22 script, which remaps the name from lower to upper [or vice-versa] and even checks out if the remapped name is the same as the original name. Note how the script is parameterized using shell variables and proper quoting
sed -i 's/hello/world/' file.txt018
sed -i 's/hello/world/' file.txt019
sed -i 's/hello/world/' file.txt020
sed -i 's/hello/world/' file.txt021
sed -i 's/hello/world/' file.txt022
sed -i 's/hello/world/' file.txt023
sed -i 's/hello/world/' file.txt024
sed -i 's/hello/world/' file.txt025
sed -i 's/hello/world/' file.txt026
sed -i 's/hello/world/' file.txt027
sed -i 's/hello/world/' file.txt028
sed -i 's/hello/world/' file.txt029
sed -i 's/hello/world/' file.txt030
sed -i 's/hello/world/' file.txt031
sed -i 's/hello/world/' file.txt032
sed -i 's/hello/world/' file.txt033
sed -i 's/hello/world/' file.txt034
sed -i 's/hello/world/' file.txt035
sed -i 's/hello/world/' file.txt036
sed -i 's/hello/world/' file.txt037
sed -i 's/hello/world/' file.txt038
sed -i 's/hello/world/' file.txt039
sed -i 's/hello/world/' file.txt040
7. 5 Print sed -i 's/hello/world/' file.txt
0447 Environment
This script strips the definition of the shell functions from the output of the
sed -i 's/hello/world/' file.txt0448 Bourne-shell command
sed -i 's/hello/world/' file.txt041
sed -i 's/hello/world/' file.txt042
sed -i 's/hello/world/' file.txt043
sed -i 's/hello/world/' file.txt044
sed -i 's/hello/world/' file.txt045
sed -i 's/hello/world/' file.txt046
sed -i 's/hello/world/' file.txt047
7. 6 Reverse Characters of Lines
This script can be used to reverse the position of characters in lines. The technique moves two characters at a time, hence it is faster than more intuitive implementations
Note the
sed -i 's/hello/world/' file.txt0449 command before the definition of the label. Điều này thường cần thiết để đặt lại cờ được kiểm tra bằng lệnh
sed -i 's/hello/world/' file.txt983
Imaginative readers will find uses for this script. Một ví dụ là đảo ngược đầu ra của
sed -i 's/hello/world/' file.txt0451. 10
sed -i 's/hello/world/' file.txt048
sed -i 's/hello/world/' file.txt049
sed -i 's/hello/world/' file.txt050
sed -i 's/hello/world/' file.txt051
7. 7 Text search across multiple lines
Phần này sử dụng lệnh
sed -i 's/hello/world/' file.txt71 và
sed -i 's/hello/world/' file.txt939 để tìm kiếm các từ liên tiếp trên nhiều dòng. Xem kỹ thuật Multiline
Những ví dụ này giải quyết việc tìm kiếm các từ xuất hiện gấp đôi trong tài liệu
Finding doubled words in a single line is easy using GNU
sed -i 's/hello/world/' file.txt687 and similarly with GNU
sed -i 's/hello/world/' file.txt22
sed -i 's/hello/world/' file.txt052
- Cụm từ thông dụng ‘\b\w+\s+’ tìm kiếm ranh giới từ [‘\b’], theo sau là một hoặc nhiều ký tự từ [‘\w+’], tiếp theo là khoảng trắng [‘\s+’]. See regexp extensions
- Adding parentheses around the ‘[\w+]’ expression creates a subexpression. Mẫu biểu thức chính quy '[PATTERN]\s+\1' xác định một biểu thức con [trong ngoặc đơn], theo sau là tham chiếu ngược, được phân tách bằng khoảng trắng. Kết hợp thành công có nghĩa là MẪU được lặp lại hai lần liên tiếp. See Back-references and Subexpressions
- Biểu thức ranh giới từ [‘\b’] ở cả hai đầu đảm bảo các từ một phần không được khớp [e. g. 'the then' không phải là một kết hợp mong muốn]
- The -E option enables extended regular expression syntax, alleviating the need to add backslashes before the parenthesis. Xem cú pháp ERE
When the doubled word span two lines the above regular expression will not find them as
sed -i 's/hello/world/' file.txt687 and
sed -i 's/hello/world/' file.txt22 operate line-by-line
Bằng cách sử dụng các lệnh
sed -i 's/hello/world/' file.txt71 và
sed -i 's/hello/world/' file.txt939,
sed -i 's/hello/world/' file.txt22 có thể áp dụng các biểu thức chính quy trên nhiều dòng [nghĩa là nhiều dòng được lưu trữ trong không gian mẫu và biểu thức chính quy hoạt động trên đó]
sed -i 's/hello/world/' file.txt053
- Lệnh
sed -i 's/hello/world/' file.txt
71 nối thêm dòng tiếp theo vào không gian mẫu [do đó đảm bảo nó chứa hai dòng liên tiếp trong mỗi chu kỳ] - The regular expression uses ‘\s+’ for word separator which matches both spaces and newlines
- The regular expression matches, the entire pattern space is printed with
sed -i 's/hello/world/' file.txt
37. Không có dòng nào được in theo mặc định do tùy chọn -n - The
sed -i 's/hello/world/' file.txt
939 removes the first line from the pattern space [up until the first newline], readying it for the next cycle
See the GNU
sed -i 's/hello/world/' file.txt0464 manual for an alternative solution using
sed -i 's/hello/world/' file.txt0465 and
sed -i 's/hello/world/' file.txt0466 at https. //gnu. org/s/coreutils/manual/html_node/Squeezing-and-deleting. html
7. 8 Line length adjustment
This section uses
sed -i 's/hello/world/' file.txt71 and
sed -i 's/hello/world/' file.txt939 commands to search for consecutive words spanning multiple lines, and the
sed -i 's/hello/world/' file.txt982 command for branching. See Multiline techniques and Branching and flow control
This [somewhat contrived] example deal with formatting and wrapping lines of text of the following input file
sed -i 's/hello/world/' file.txt054
The following sed program wraps lines at 40 characters
sed -i 's/hello/world/' file.txt055
The wrapped output
sed -i 's/hello/world/' file.txt056
7. 9 Reverse Lines of Files
This one begins a series of totally useless [yet interesting] scripts emulating various Unix commands. This, in particular, is a
sed -i 's/hello/world/' file.txt0470 workalike
Note that on implementations other than GNU
sed -i 's/hello/world/' file.txt22 this script might easily overflow internal buffers
sed -i 's/hello/world/' file.txt057
sed -i 's/hello/world/' file.txt058
sed -i 's/hello/world/' file.txt059
sed -i 's/hello/world/' file.txt060
7. 10 Numbering Lines
This script replaces ‘cat -n’; in fact it formats its output exactly like GNU
sed -i 's/hello/world/' file.txt0472 does
Of course this is completely useless and for two reasons. first, because somebody else did it in C, second, because the following Bourne-shell script could be used for the same purpose and would be much faster
sed -i 's/hello/world/' file.txt061
It uses
sed -i 's/hello/world/' file.txt22 to print the line number, then groups lines two by two using
sed -i 's/hello/world/' file.txt71. Of course, this script does not teach as much as the one presented below
The algorithm used for incrementing uses both buffers, so the line is printed as soon as possible and then discarded. The number is split so that changing digits go in a buffer and unchanged ones go in the other; the changed digits are modified in a single step [using a
sed -i 's/hello/world/' file.txt183 command]. The line number for the next line is then composed and stored in the hold space, to be used in the next iteration
sed -i 's/hello/world/' file.txt062
sed -i 's/hello/world/' file.txt063
sed -i 's/hello/world/' file.txt064
sed -i 's/hello/world/' file.txt065
sed -i 's/hello/world/' file.txt066
sed -i 's/hello/world/' file.txt067
sed -i 's/hello/world/' file.txt068
sed -i 's/hello/world/' file.txt069
sed -i 's/hello/world/' file.txt070
7. 11 Numbering Non-blank Lines
Emulating ‘cat -b’ is almost the same as ‘cat -n’—we only have to select which lines are to be numbered and which are not
The part that is common to this script and the previous one is not commented to show how important it is to comment
sed -i 's/hello/world/' file.txt22 scripts properly
sed -i 's/hello/world/' file.txt062
sed -i 's/hello/world/' file.txt072
sed -i 's/hello/world/' file.txt073
7. 12 Counting Characters
This script shows another way to do arithmetic with
sed -i 's/hello/world/' file.txt22. In this case we have to add possibly large numbers, so implementing this by successive increments would not be feasible [and possibly even more complicated to contrive than this script]
The approach is to map numbers to letters, kind of an abacus implemented with
sed -i 's/hello/world/' file.txt22. ‘a’s are units, ‘b’s are tens and so on. we simply add the number of characters on the current line as units, and then propagate the carry to tens, hundreds, and so on
As usual, running totals are kept in hold space
On the last line, we convert the abacus form back to decimal. For the sake of variety, this is done with a loop rather than with some 80
sed -i 's/hello/world/' file.txt967 commands11. first we convert units, removing ‘a’s from the number; then we rotate letters so that tens become ‘a’s, and so on until no more letters remain
sed -i 's/hello/world/' file.txt062
sed -i 's/hello/world/' file.txt075
sed -i 's/hello/world/' file.txt076
sed -i 's/hello/world/' file.txt077
sed -i 's/hello/world/' file.txt078
sed -i 's/hello/world/' file.txt079
sed -i 's/hello/world/' file.txt080
7. 13 Counting Words
This script is almost the same as the previous one, once each of the words on the line is converted to a single ‘a’ [in the previous script each letter was changed to an ‘a’]
It is interesting that real
sed -i 's/hello/world/' file.txt0480 programs have optimized loops for ‘wc -c’, so they are much slower at counting words rather than characters. This script’s bottleneck, instead, is arithmetic, and hence the word-counting one is faster [it has to manage smaller numbers]
Again, the common parts are not commented to show the importance of commenting
sed -i 's/hello/world/' file.txt22 scripts
sed -i 's/hello/world/' file.txt062
sed -i 's/hello/world/' file.txt082
sed -i 's/hello/world/' file.txt083
sed -i 's/hello/world/' file.txt084
7. 14 Counting Lines
Không có điều kỳ lạ nào được thực hiện ngay bây giờ, bởi vì
sed -i 's/hello/world/' file.txt22 cung cấp cho chúng tôi chức năng 'wc -l' miễn phí. Look
7. 15 Printing the First Lines
This script is probably the simplest useful
sed -i 's/hello/world/' file.txt22 script. It displays the first 10 lines of input; the number of displayed lines is right before the
sed -i 's/hello/world/' file.txt900 command
7. 16 Printing the Last Lines
Printing the last n lines rather than the first is more complex but indeed possible. n is encoded in the second line, before the bang character
This script is similar to the
sed -i 's/hello/world/' file.txt0470 script in that it keeps the final output in the hold space and prints it at the end
sed -i 's/hello/world/' file.txt062
sed -i 's/hello/world/' file.txt086
Mainly, the scripts keeps a window of 10 lines and slides it by adding a line and deleting the oldest [the substitution command on the second line works like a
sed -i 's/hello/world/' file.txt939 command but does not restart the loop]
The “sliding window” technique is a very powerful way to write efficient and complex
sed -i 's/hello/world/' file.txt22 scripts, because commands like
sed -i 's/hello/world/' file.txt957 would require a lot of work if implemented manually
To introduce the technique, which is fully demonstrated in the rest of this chapter and is based on the
sed -i 's/hello/world/' file.txt71,
sed -i 's/hello/world/' file.txt957 and
sed -i 's/hello/world/' file.txt939 commands, here is an implementation of
sed -i 's/hello/world/' file.txt0492 using a simple “sliding window. ”
This looks complicated but in fact the working is the same as the last script. after we have kicked in the appropriate number of lines, however, we stop using the hold space to keep inter-line state, and instead use
sed -i 's/hello/world/' file.txt71 and
sed -i 's/hello/world/' file.txt939 to slide pattern space by one line
sed -i 's/hello/world/' file.txt007
sed -i 's/hello/world/' file.txt088
Note how the first, second and fourth line are inactive after the first ten lines of input. After that, all the script does is. exiting on the last line of input, appending the next input line to pattern space, and removing the first line
7. 17 Make Duplicate Lines Unique
This is an example of the art of using the
sed -i 's/hello/world/' file.txt71,
sed -i 's/hello/world/' file.txt957 and
sed -i 's/hello/world/' file.txt939 commands, probably the most difficult to master
sed -i 's/hello/world/' file.txt089
sed -i 's/hello/world/' file.txt090
sed -i 's/hello/world/' file.txt091
sed -i 's/hello/world/' file.txt092
As you can see, we maintain a 2-line window using
sed -i 's/hello/world/' file.txt957 and
sed -i 's/hello/world/' file.txt939. This technique is often used in advanced
sed -i 's/hello/world/' file.txt22 scripts
7. 18 Print Duplicated Lines of Input
This script prints only duplicated lines, like ‘uniq -d’
sed -i 's/hello/world/' file.txt062
sed -i 's/hello/world/' file.txt094
sed -i 's/hello/world/' file.txt095
sed -i 's/hello/world/' file.txt096
sed -i 's/hello/world/' file.txt097
7. 19 Remove All Duplicated Lines
This script prints only unique lines, like ‘uniq -u’
sed -i 's/hello/world/' file.txt007
sed -i 's/hello/world/' file.txt099
sed -i 's/hello/world/' file.txt00
sed -i 's/hello/world/' file.txt01
sed -i 's/hello/world/' file.txt02
7. 20 Squeezing Blank Lines
As a final example, here are three scripts, of increasing complexity and speed, that implement the same function as ‘cat -s’, that is squeezing blank lines
The first leaves a blank line at the beginning and end if there are some already
sed -i 's/hello/world/' file.txt007
sed -i 's/hello/world/' file.txt04
sed -i 's/hello/world/' file.txt05
This one is a bit more complex and removes all empty lines at the beginning. It does leave a single blank line at end if one was there
sed -i 's/hello/world/' file.txt007
sed -i 's/hello/world/' file.txt07
sed -i 's/hello/world/' file.txt08
This removes leading and trailing blank lines. It is also the fastest. Note that loops are completely done with
sed -i 's/hello/world/' file.txt952 and
sed -i 's/hello/world/' file.txt982, without relying on
sed -i 's/hello/world/' file.txt22 to restart the script automatically at the end of a line
sed -i 's/hello/world/' file.txt062
sed -i 's/hello/world/' file.txt10
sed -i 's/hello/world/' file.txt11
sed -i 's/hello/world/' file.txt12
sed -i 's/hello/world/' file.txt13
sed -i 's/hello/world/' file.txt14
8 GNU sed -i 's/hello/world/' file.txt
22’s Limitations and Non-limitations
Đối với những người muốn viết tập lệnh
sed -i 's/hello/world/' file.txt22 di động, hãy lưu ý rằng một số triển khai đã được biết là giới hạn độ dài dòng [đối với mẫu và khoảng trắng] không quá 4000 byte. The POSIX standard specifies that conforming
sed -i 's/hello/world/' file.txt22 implementations shall support at least 8192 byte line lengths. GNU
sed -i 's/hello/world/' file.txt22 has no built-in limit on line length; as long as it can
sed -i 's/hello/world/' file.txt0008 more [virtual] memory, you can feed or construct lines as long as you like
However, recursion is used to handle subpatterns and indefinite repetition. This means that the available stack space may limit the size of the buffer that can be processed by certain patterns
9 Other Resources for Learning About sed -i 's/hello/world/' file.txt
22
For up to date information about GNU
sed -i 's/hello/world/' file.txt22 please visit https. //www. gnu. org/software/sed/
Send general questions and suggestions to sed-devel@gnu. org. Visit the mailing list archives for past discussions at https. //lists. gnu. org/archive/html/sed-devel/
The following resources provide information about
sed -i 's/hello/world/' file.txt22 [both GNU
sed -i 's/hello/world/' file.txt22 and other variations]. Note these not maintained by GNU
sed -i 's/hello/world/' file.txt22 developers
10 Reporting Bugs
Email bug reports to bug-sed@gnu. org. Also, please include the output of ‘sed --version’ in the body of your report if at all possible
Please do not send a bug report like this
sed -i 's/hello/world/' file.txt15
If GNU
sed -i 's/hello/world/' file.txt22 doesn’t configure your favorite package, take a few extra minutes to identify the specific problem and make a stand-alone test case. Unlike other programs such as C compilers, making such test cases for
sed -i 's/hello/world/' file.txt22 is quite simple
A stand-alone test case includes all the data necessary to perform the test, and the specific invocation of
sed -i 's/hello/world/' file.txt22 that causes the problem. The smaller a stand-alone test case is, the better. A test case should not involve something as far removed from
sed -i 's/hello/world/' file.txt22 as “try to configure frobme-1. 3. 4”. Yes, that is in principle enough information to look for the bug, but that is not a very practical prospect
Here are a few commonly reported bugs that are not bugs
sed -i 's/hello/world/' file.txt71 command on the last line
Most versions of
sed -i 's/hello/world/' file.txt22 exit without printing anything when the
sed -i 's/hello/world/' file.txt71 command is issued on the last line of a file. GNU
sed -i 's/hello/world/' file.txt22 prints pattern space before exiting unless of course the
sed -i 's/hello/world/' file.txt45 command switch has been specified. This choice is by design
Default behavior [gnu extension, non-POSIX conforming]
To force POSIX-conforming behavior
sed -i 's/hello/world/' file.txt16
For example, the behavior of
would depend on whether foo has an even or an odd number of lines12. Or, when writing a script to read the next few lines following a pattern match, traditional implementations of
sed -i 's/hello/world/' file.txt22 would force you to write something like
sed -i 's/hello/world/' file.txt17
instead of just
sed -i 's/hello/world/' file.txt18
In any case, the simplest workaround is to use
sed -i 's/hello/world/' file.txt0024 in scripts that rely on the traditional behavior, or to set the
sed -i 's/hello/world/' file.txt72 variable to a non-empty valueRegex syntax clashes [problems with backslashes]
sed -i 's/hello/world/' file.txt22 uses the POSIX basic regular expression syntax. According to the standard, the meaning of some escape sequences is undefined in this syntax; notable in the case of
sed -i 's/hello/world/' file.txt22 are
sed -i 's/hello/world/' file.txt911,
sed -i 's/hello/world/' file.txt923,
sed -i 's/hello/world/' file.txt925,
sed -i 's/hello/world/' file.txt156,
sed -i 's/hello/world/' file.txt157,
sed -i 's/hello/world/' file.txt991,
sed -i 's/hello/world/' file.txt992,
sed -i 's/hello/world/' file.txt987,
sed -i 's/hello/world/' file.txt988,
sed -i 's/hello/world/' file.txt985, and
sed -i 's/hello/world/' file.txt986
Như trong tất cả các chương trình GNU sử dụng các biểu thức chính quy cơ bản POSIX,
sed -i 's/hello/world/' file.txt22 diễn giải các chuỗi thoát này thành các ký tự đặc biệt. So,
sed -i 's/hello/world/' file.txt0040 matches one or more occurrences of ‘x’.
sed -i 's/hello/world/' file.txt0041 matches either ‘abc’ or ‘def’
This syntax may cause problems when running scripts written for other
sed -i 's/hello/world/' file.txt22s. Some
sed -i 's/hello/world/' file.txt22 programs have been written with the assumption that
sed -i 's/hello/world/' file.txt911 and
sed -i 's/hello/world/' file.txt923 match the literal characters
sed -i 's/hello/world/' file.txt0046 and
sed -i 's/hello/world/' file.txt0047. Such scripts must be modified by removing the spurious backslashes if they are to be used with modern implementations of
sed -i 's/hello/world/' file.txt22, like GNU
sed -i 's/hello/world/' file.txt22
On the other hand, some scripts use s. abc\. def. g to remove occurrences of either
sed -i 's/hello/world/' file.txt0050 or
sed -i 's/hello/world/' file.txt0051. While this worked until
sed -i 's/hello/world/' file.txt22 4. 0. x, newer versions interpret this as removing the string
sed -i 's/hello/world/' file.txt0053. This is again undefined behavior according to POSIX, and this interpretation is arguably more robust. older
sed -i 's/hello/world/' file.txt22s, for example, required that the regex matcher parsed
sed -i 's/hello/world/' file.txt0055 as
sed -i 's/hello/world/' file.txt994 in the common case of escaping a slash, which is again undefined behavior; the new behavior avoids this, and this is good because the regex matcher is only partially under our control
In addition, this version of
sed -i 's/hello/world/' file.txt22 supports several escape characters [some of which are multi-character] to insert non-printable characters in scripts [
sed 's/hello/world/' input.txt > output.txt902,
sed -i 's/hello/world/' file.txt0059,
sed -i 's/hello/world/' file.txt0060,
sed -i 's/hello/world/' file.txt0061,
sed 's/hello/world/' input.txt > output.txt905,
sed -i 's/hello/world/' file.txt953,
sed 's/hello/world/' input.txt > output.txt907,
sed -i 's/hello/world/' file.txt0065]. These can cause similar problems with scripts written for other
sed -i 's/hello/world/' file.txt22s-i clobbers read-only files
In short, ‘sed -i’ will let you delete the contents of a read-only file, and in general the -i option [see Invocation] lets you clobber protected files. This is not a bug, but rather a consequence of how the Unix file system works
The permissions on a file say what can happen to the data in that file, while the permissions on a directory say what can happen to the list of files in that directory. ‘sed -i’ will not ever open for writing a file that is already on disk. Rather, it will work on a temporary file that is finally renamed to the original name. if you rename or delete files, you’re actually modifying the contents of the directory, so the operation depends on the permissions of the directory, not of the file. For this same reason,
sed -i 's/hello/world/' file.txt22 does not let you use -i on a writable file in a read-only directory, and will break hard or symbolic links when -i is used on such a file
sed -i 's/hello/world/' file.txt0068 does not work [gives an error]
There is no line 0. 0 is a special address that is only used to treat addresses like
sed -i 's/hello/world/' file.txt0069 as active when the script starts. if you write
sed -i 's/hello/world/' file.txt0070 and the first line includes the word ‘abc’, then that match would be ignored because address ranges must span at least two lines [barring the end of the file]; but what you probably wanted is to delete every line up to the first one including ‘abc’, and this is obtained with
sed -i 's/hello/world/' file.txt0071
sed -i 's/hello/world/' file.txt0072 is case insensitive
You are encountering problems with locales. POSIX mandates that
sed -i 's/hello/world/' file.txt0072 uses the current locale’s collation order – in C parlance, that means using
sed -i 's/hello/world/' file.txt0074 instead of
sed -i 's/hello/world/' file.txt0075. Some locales have a case-insensitive collation order, others don’t
Another problem is that
sed -i 's/hello/world/' file.txt0072 tries to use collation symbols. This only happens if you are on the GNU system, using GNU libc’s regular expression matcher instead of compiling the one supplied with GNU sed. In a Danish locale, for example, the regular expression
sed -i 's/hello/world/' file.txt0077 matches the string ‘aa’, because this is a single collating symbol that comes after ‘a’ and before ‘b’; ‘ll’ behaves similarly in Spanish locales, or ‘ij’ in Dutch locales
To work around these problems, which may cause bugs in shell scripts, set the
sed -i 's/hello/world/' file.txt0078 and
sed 's/hello/world/' input.txt > output.txt946 environment variables to ‘C’
sed 's/hello/world/' input.txt > output.txt926 does not clear pattern space
This happens if your input stream includes invalid multibyte sequences. POSIX mandates that such sequences are not matched by ‘. ’, so that ‘s/. *//’ will not clear pattern space as you would expect. In fact, there is no way to clear sed’s buffers in the middle of the script in most multibyte locales [including UTF-8 locales]. For this reason, GNU
sed -i 's/hello/world/' file.txt22 provides a ‘z’ command [for ‘zap’] as an extension
To work around these problems, which may cause bugs in shell scripts, set the
sed -i 's/hello/world/' file.txt0078 and
sed 's/hello/world/' input.txt > output.txt946 environment variables to ‘C’
Appendix A GNU Free Documentation License
Version 1. 3, 3 November 2008
sed -i 's/hello/world/' file.txt19
- PREAMBLE
The purpose of this License is to make a manual, textbook, or other functional and useful document free in the sense of freedom. to assure everyone the effective freedom to copy and redistribute it, with or without modifying it, either commercially or noncommercially. Secondarily, this License preserves for the author and publisher a way to get credit for their work, while not being considered responsible for modifications made by others
This License is a kind of “copyleft”, which means that derivative works of the document must themselves be free in the same sense. It complements the GNU General Public License, which is a copyleft license designed for free software
Chúng tôi đã thiết kế Giấy phép này để sử dụng nó cho hướng dẫn sử dụng phần mềm miễn phí, bởi vì phần mềm miễn phí cần tài liệu miễn phí. a free program should come with manuals providing the same freedoms that the software does. But this License is not limited to software manuals; it can be used for any textual work, regardless of subject matter or whether it is published as a printed book. We recommend this License principally for works whose purpose is instruction or reference
- APPLICABILITY AND DEFINITIONS
This License applies to any manual or other work, in any medium, that contains a notice placed by the copyright holder saying it can be distributed under the terms of this License. Such a notice grants a world-wide, royalty-free license, unlimited in duration, to use that work under the conditions stated herein. The “Document”, below, refers to any such manual or work. Any member of the public is a licensee, and is addressed as “you”. You accept the license if you copy, modify or distribute the work in a way requiring permission under copyright law
A “Modified Version” of the Document means any work containing the Document or a portion of it, either copied verbatim, or with modifications and/or translated into another language
A “Secondary Section” is a named appendix or a front-matter section of the Document that deals exclusively with the relationship of the publishers or authors of the Document to the Document’s overall subject [or to related matters] and contains nothing that could fall directly within that overall subject. [Thus, if the Document is in part a textbook of mathematics, a Secondary Section may not explain any mathematics. ] The relationship could be a matter of historical connection with the subject or with related matters, or of legal, commercial, philosophical, ethical or political position regarding them
The “Invariant Sections” are certain Secondary Sections whose titles are designated, as being those of Invariant Sections, in the notice that says that the Document is released under this License. Nếu một phần không phù hợp với định nghĩa ở trên về Thứ yếu thì nó không được phép chỉ định là Bất biến. The Document may contain zero Invariant Sections. If the Document does not identify any Invariant Sections then there are none
The “Cover Texts” are certain short passages of text that are listed, as Front-Cover Texts or Back-Cover Texts, in the notice that says that the Document is released under this License. A Front-Cover Text may be at most 5 words, and a Back-Cover Text may be at most 25 words
A “Transparent” copy of the Document means a machine-readable copy, represented in a format whose specification is available to the general public, that is suitable for revising the document straightforwardly with generic text editors or [for images composed of pixels] generic paint programs or [for drawings] some widely available drawing editor, and that is suitable for input to text formatters or for automatic translation to a variety of formats suitable for input to text formatters. A copy made in an otherwise Transparent file format whose markup, or absence of markup, has been arranged to thwart or discourage subsequent modification by readers is not Transparent. An image format is not Transparent if used for any substantial amount of text. A copy that is not “Transparent” is called “Opaque”
Examples of suitable formats for Transparent copies include plain ASCII without markup, Texinfo input format, LaTeX input format, SGML or XML using a publicly available DTD, and standard-conforming simple HTML, PostScript or PDF designed for human modification. Examples of transparent image formats include PNG, XCF and JPG. Opaque formats include proprietary formats that can be read and edited only by proprietary word processors, SGML or XML for which the DTD and/or processing tools are not generally available, and the machine-generated HTML, PostScript or PDF produced by some word processors for output purposes only
The “Title Page” means, for a printed book, the title page itself, plus such following pages as are needed to hold, legibly, the material this License requires to appear in the title page. For works in formats which do not have any title page as such, “Title Page” means the text near the most prominent appearance of the work’s title, preceding the beginning of the body of the text
The “publisher” means any person or entity that distributes copies of the Document to the public
A section “Entitled XYZ” means a named subunit of the Document whose title either is precisely XYZ or contains XYZ in parentheses following text that translates XYZ in another language. [Here XYZ stands for a specific section name mentioned below, such as “Acknowledgements”, “Dedications”, “Endorsements”, or “History”. ] To “Preserve the Title” of such a section when you modify the Document means that it remains a section “Entitled XYZ” according to this definition
The Document may include Warranty Disclaimers next to the notice which states that this License applies to the Document. These Warranty Disclaimers are considered to be included by reference in this License, but only as regards disclaiming warranties. any other implication that these Warranty Disclaimers may have is void and has no effect on the meaning of this License
- VERBATIM COPYING
You may copy and distribute the Document in any medium, either commercially or noncommercially, provided that this License, the copyright notices, and the license notice saying this License applies to the Document are reproduced in all copies, and that you add no other conditions whatsoever to those of this License. You may not use technical measures to obstruct or control the reading or further copying of the copies you make or distribute. However, you may accept compensation in exchange for copies. If you distribute a large enough number of copies you must also follow the conditions in section 3
You may also lend copies, under the same conditions stated above, and you may publicly display copies
- COPYING IN QUANTITY
If you publish printed copies [or copies in media that commonly have printed covers] of the Document, numbering more than 100, and the Document’s license notice requires Cover Texts, you must enclose the copies in covers that carry, clearly and legibly, all these Cover Texts. Front-Cover Texts on the front cover, and Back-Cover Texts on the back cover. Both covers must also clearly and legibly identify you as the publisher of these copies. The front cover must present the full title with all words of the title equally prominent and visible. You may add other material on the covers in addition. Copying with changes limited to the covers, as long as they preserve the title of the Document and satisfy these conditions, can be treated as verbatim copying in other respects
If the required texts for either cover are too voluminous to fit legibly, you should put the first ones listed [as many as fit reasonably] on the actual cover, and continue the rest onto adjacent pages
If you publish or distribute Opaque copies of the Document numbering more than 100, you must either include a machine-readable Transparent copy along with each Opaque copy, or state in or with each Opaque copy a computer-network location from which the general network-using public has access to download using public-standard network protocols a complete Transparent copy of the Document, free of added material. If you use the latter option, you must take reasonably prudent steps, when you begin distribution of Opaque copies in quantity, to ensure that this Transparent copy will remain thus accessible at the stated location until at least one year after the last time you distribute an Opaque copy [directly or through your agents or retailers] of that edition to the public
It is requested, but not required, that you contact the authors of the Document well before redistributing any large number of copies, to give them a chance to provide you with an updated version of the Document
- MODIFICATIONS
Bạn có thể sao chép và phân phối Phiên bản đã sửa đổi của Tài liệu theo các điều kiện của phần 2 và 3 ở trên, miễn là bạn phát hành Phiên bản đã sửa đổi theo đúng Giấy phép này, với Phiên bản đã sửa đổi đóng vai trò của Tài liệu, do đó cấp phép phân phối và sửa đổi . In addition, you must do these things in the Modified Version
- Use in the Title Page [and on the covers, if any] a title distinct from that of the Document, and from those of previous versions [which should, if there were any, be listed in the History section of the Document]. You may use the same title as a previous version if the original publisher of that version gives permission
- List on the Title Page, as authors, one or more persons or entities responsible for authorship of the modifications in the Modified Version, together with at least five of the principal authors of the Document [all of its principal authors, if it has fewer than five], unless they release you from this requirement
- State on the Title page the name of the publisher of the Modified Version, as the publisher
- Preserve all the copyright notices of the Document
- Add an appropriate copyright notice for your modifications adjacent to the other copyright notices
- Include, immediately after the copyright notices, a license notice giving the public permission to use the Modified Version under the terms of this License, in the form shown in the Addendum below
- Preserve in that license notice the full lists of Invariant Sections and required Cover Texts given in the Document’s license notice
- Include an unaltered copy of this License
- Preserve the section Entitled “History”, Preserve its Title, and add to it an item stating at least the title, year, new authors, and publisher of the Modified Version as given on the Title Page. If there is no section Entitled “History” in the Document, create one stating the title, year, authors, and publisher of the Document as given on its Title Page, then add an item describing the Modified Version as stated in the previous sentence
- Preserve the network location, if any, given in the Document for public access to a Transparent copy of the Document, and likewise the network locations given in the Document for previous versions it was based on. These may be placed in the “History” section. You may omit a network location for a work that was published at least four years before the Document itself, or if the original publisher of the version it refers to gives permission
- For any section Entitled “Acknowledgements” or “Dedications”, Preserve the Title of the section, and preserve in the section all the substance and tone of each of the contributor acknowledgements and/or dedications given therein
- Preserve all the Invariant Sections of the Document, unaltered in their text and in their titles. Section numbers or the equivalent are not considered part of the section titles
- Delete any section Entitled “Endorsements”. Such a section may not be included in the Modified Version
- Do not retitle any existing section to be Entitled “Endorsements” or to conflict in title with any Invariant Section
- Preserve any Warranty Disclaimers
If the Modified Version includes new front-matter sections or appendices that qualify as Secondary Sections and contain no material copied from the Document, you may at your option designate some or all of these sections as invariant. To do this, add their titles to the list of Invariant Sections in the Modified Version’s license notice. These titles must be distinct from any other section titles
You may add a section Entitled “Endorsements”, provided it contains nothing but endorsements of your Modified Version by various parties—for example, statements of peer review or that the text has been approved by an organization as the authoritative definition of a standard
You may add a passage of up to five words as a Front-Cover Text, and a passage of up to 25 words as a Back-Cover Text, to the end of the list of Cover Texts in the Modified Version. Only one passage of Front-Cover Text and one of Back-Cover Text may be added by [or through arrangements made by] any one entity. If the Document already includes a cover text for the same cover, previously added by you or by arrangement made by the same entity you are acting on behalf of, you may not add another; but you may replace the old one, on explicit permission from the previous publisher that added the old one
The author[s] and publisher[s] of the Document do not by this License give permission to use their names for publicity for or to assert or imply endorsement of any Modified Version
- COMBINING DOCUMENTS
You may combine the Document with other documents released under this License, under the terms defined in section 4 above for modified versions, provided that you include in the combination all of the Invariant Sections of all of the original documents, unmodified, and list them all as Invariant Sections of your combined work in its license notice, and that you preserve all their Warranty Disclaimers
The combined work need only contain one copy of this License, and multiple identical Invariant Sections may be replaced with a single copy. If there are multiple Invariant Sections with the same name but different contents, make the title of each such section unique by adding at the end of it, in parentheses, the name of the original author or publisher of that section if known, or else a unique number. Make the same adjustment to the section titles in the list of Invariant Sections in the license notice of the combined work
In the combination, you must combine any sections Entitled “History” in the various original documents, forming one section Entitled “History”; likewise combine any sections Entitled “Acknowledgements”, and any sections Entitled “Dedications”. You must delete all sections Entitled “Endorsements. ”
- COLLECTIONS OF DOCUMENTS
You may make a collection consisting of the Document and other documents released under this License, and replace the individual copies of this License in the various documents with a single copy that is included in the collection, provided that you follow the rules of this License for verbatim copying of each of the documents in all other respects
You may extract a single document from such a collection, and distribute it individually under this License, provided you insert a copy of this License into the extracted document, and follow this License in all other respects regarding verbatim copying of that document
- AGGREGATION WITH INDEPENDENT WORKS
A compilation of the Document or its derivatives with other separate and independent documents or works, in or on a volume of a storage or distribution medium, is called an “aggregate” if the copyright resulting from the compilation is not used to limit the legal rights of the compilation’s users beyond what the individual works permit. When the Document is included in an aggregate, this License does not apply to the other works in the aggregate which are not themselves derivative works of the Document
If the Cover Text requirement of section 3 is applicable to these copies of the Document, then if the Document is less than one half of the entire aggregate, the Document’s Cover Texts may be placed on covers that bracket the Document within the aggregate, or the electronic equivalent of covers if the Document is in electronic form. Otherwise they must appear on printed covers that bracket the whole aggregate
- TRANSLATION
Translation is considered a kind of modification, so you may distribute translations of the Document under the terms of section 4. Replacing Invariant Sections with translations requires special permission from their copyright holders, but you may include translations of some or all Invariant Sections in addition to the original versions of these Invariant Sections. You may include a translation of this License, and all the license notices in the Document, and any Warranty Disclaimers, provided that you also include the original English version of this License and the original versions of those notices and disclaimers. In case of a disagreement between the translation and the original version of this License or a notice or disclaimer, the original version will prevail
If a section in the Document is Entitled “Acknowledgements”, “Dedications”, or “History”, the requirement [section 4] to Preserve its Title [section 1] will typically require changing the actual title
- TERMINATION
You may not copy, modify, sublicense, or distribute the Document except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, or distribute it is void, and will automatically terminate your rights under this License
However, if you cease all violation of this License, then your license from a particular copyright holder is reinstated [a] provisionally, unless and until the copyright holder explicitly and finally terminates your license, and [b] permanently, if the copyright holder fails to notify you of the violation by some reasonable means prior to 60 days after the cessation
Moreover, your license from a particular copyright holder is reinstated permanently if the copyright holder notifies you of the violation by some reasonable means, this is the first time you have received notice of violation of this License [for any work] from that copyright holder, and you cure the violation prior to 30 days after your receipt of the notice
Việc chấm dứt quyền của bạn theo phần này không chấm dứt giấy phép của các bên đã nhận bản sao hoặc quyền từ bạn theo Giấy phép này. If your rights have been terminated and not permanently reinstated, receipt of a copy of some or all of the same material does not give you any rights to use it
- FUTURE REVISIONS OF THIS LICENSE
The Free Software Foundation may publish new, revised versions of the GNU Free Documentation License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. See https. //www. gnu. org/copyleft/
Each version of the License is given a distinguishing version number. If the Document specifies that a particular numbered version of this License “or any later version” applies to it, you have the option of following the terms and conditions either of that specified version or of any later version that has been published [not as a draft] by the Free Software Foundation. If the Document does not specify a version number of this License, you may choose any version ever published [not as a draft] by the Free Software Foundation. If the Document specifies that a proxy can decide which future versions of this License can be used, that proxy’s public statement of acceptance of a version permanently authorizes you to choose that version for the Document
- GIẤY PHÉP
“Trang web cộng tác nhiều tác giả lớn” [hoặc “Trang web MMC”] có nghĩa là bất kỳ máy chủ World Wide Web nào xuất bản các tác phẩm có bản quyền và cũng cung cấp các phương tiện nổi bật để bất kỳ ai chỉnh sửa các tác phẩm đó. A public wiki that anybody can edit is an example of such a server. A “Massive Multiauthor Collaboration” [or “MMC”] contained in the site means any set of copyrightable works thus published on the MMC site
“CC-BY-SA” means the Creative Commons Attribution-Share Alike 3. 0 license published by Creative Commons Corporation, a not-for-profit corporation with a principal place of business in San Francisco, California, as well as future copyleft versions of that license published by that same organization
“Incorporate” means to publish or republish a Document, in whole or in part, as part of another Document
An MMC is “eligible for relicensing” if it is licensed under this License, and if all works that were first published under this License somewhere other than this MMC, and subsequently incorporated in whole or in part into the MMC, [1] had no cover texts or invariant sections, and [2] were thus incorporated prior to November 1, 2008
The operator of an MMC Site may republish an MMC contained in the site under CC-BY-SA on the same site at any time before August 1, 2009, provided the MMC is eligible for relicensing
ADDENDUM. How to use this License for your documents
To use this License in a document you have written, include a copy of the License in the document and put the following copyright and license notices just after the title page
sed -i 's/hello/world/' file.txt20
If you have Invariant Sections, Front-Cover Texts and Back-Cover Texts, replace the “with…Texts. ” line with this
sed -i 's/hello/world/' file.txt21
If you have Invariant Sections without Cover Texts, or some other combination of the three, merge those two alternatives to suit the situation
If your document contains nontrivial examples of program code, we recommend releasing these examples in parallel under your choice of free software license, such as the GNU General Public License, to permit their use in free software
Concept Index
This is a general index of all issues discussed in this manual, with the exception of the
sed -i 's/hello/world/' file.txt22 commands and command-line options